man-en-smx-rns02.docx
© 2020 SIMPLINX
- 17 -
7.
Preparing SMX-RNS02
WARNING
: Don't energize your device until you get to the relevant step.
7.1.
Internet Connection Options
The Internet can be supplied in 3 different ways to the SMX-RNS02 device.
WAN port
Plug the ethernet cable with an Internet connection into your device's WAN port. DHCP or
IP settings will be made in the next steps.
Phone USB Connection
Plug your iPhone or Android phone into your device's USB port with a charging/data cable.
Turn on mobile access from phone settings.
After energizing your device and the "Ready LED" is ON, you may need to turn the mobile
access setting OFF and ON on your phone.
Wi-Fi Connection
This option requires the SMX-N1559 module. See "
Installation of the SMX-N1559 USB WiFi
Module
"section.
7.2.
Device LEDs and Meanings
The front cover of the SMX-RNS02 module has 2 LEDs. These are, respectively from the top;
Ready LED (Ready LED)
OFF:
It is OFF when the device is first energized.
ON:
When the device is booted and ready, this LED lights up and remains in this state.
Online LED
OFF:
No Internet connection
ON :
Internet connection ready
BLINK:
There is currently an active remote connection