Simplicity ZT3500 Series Скачать руководство пользователя | Manualshive

Страница: 5 / 48

background image

3

Operator Safety

Slope Operation

Operation on slopes can be dangerous. Using the unit on a slope that is
too steep where you do not have adequate wheel traction (and control) can
cause sliding, loss of steering, control, and possible rollover. You should
not operate on a slope greater than a 5.4 foot rise over a 20 foot length (15
degrees).

Always mow across slopes, not up and down (to maintain traction on the
wheels) and avoid sudden turns or rapid speed changes. Reduce speed and
use extreme caution on ALL slopes.

Also, note that the surface condition you are on can greatly impact your
ability to safely operate this machine. Operating on wet or slippery slopes
can cause sliding and loss of steering and control. Do not operate on
slopes that are slippery, wet, or have soft soil conditions.

If you feel unsure about operating the unit on a slope, don’t do it. It’s not
worth the risk.

Thrown Objects

This unit has spinning mower blades. These blades can pick up and throw
debris that could seriously injure a bystander. Be sure to clean up the area to
be mowed and remove objects that could be thrown by the blade BEFORE you
start mowing.

Do not operate this unit without the entire grass catcher or discharge guard
(deflector) in place.

Also, do not allow anyone in the area while the unit is running! If someone
does enter the area, shut the unit off immediately until they leave.

Moving Parts

This equipment has many moving parts that can injure you or
someone else. However, if you stay in the operator zone (stay
seated in the seat), and follow the safety rules in this operator’s
manual, the unit is safe to operate.

The mower deck has spinning mower blades that can amputate
hands and feet. Do not allow anyone near the unit while it is
running! Keep safety devices (guards, shields, and switches) in
place and working.

To help you, the operator, use this equipment safely, it is
equipped with an operator-present safety system. Do NOT
attempt to alter or bypass the system. See your dealer
immediately if the system does not pass all the safety interlock
system tests found in this manual.

Not

for

Reproduction

«
...
3
4
5
6
7
...
»

Содержание ZT3500 Series

















































Отзывы:

Нет отзывов

Похожие инструкции для ZT3500 Series

Бренд: Ybravo Страницы: 2

Бренд: Stihl Страницы: 484

Бренд: MTD Страницы: 12

Бренд: Garland Страницы: 160

Бренд: Yard-Man Страницы: 11

Бренд: Poulan Pro Страницы: 32

RHINO FLEX FLAIL FX17

Бренд: Alamo Страницы: 190

Бренд: MTD Страницы: 8

Poulan Pro 961140016

Бренд: Poulan Pro Страницы: 2

Smart Speed 569

Бренд: Troy-Bilt Страницы: 20

Бренд: bannerman Страницы: 11

Бренд: Craftsman Страницы: 60

Бренд: Craftsman Страницы: 8

RS seriesMS series

Бренд: Robomow Страницы: 4

Бренд: Robomow Страницы: 84

Бренд: Einhell Royal Страницы: 84

Бренд: Craftsman Страницы: 24

Бренд: Craftsman Страницы: 24

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды