Simplicity ZT 1644 Скачать руководство пользователя страница 10

6

SAFETY & OPERATION DECALS

This unit has been designed and manufactured to pro-
vide you with the safety and reliability you would expect
from an industry leader in outdoor power equipment
manufacturing.

Although reading this manual and the safety instructions
it contains will provide you with the necessary basic
knowledge to operate this equipment safely and effec-
tively, we have placed several safety labels on the unit to
remind you of this important information while you are
operating your unit.

All  DANGER,  WARNING,  CAUTION  and instructional
messages on your rider and mower should be carefully
read and obeyed. Personal bodily injury can result when
these instructions are not followed. The information is for
your safety and it is important! The safety decals below
are on your rider and mower.

If any of these decals are lost or damaged, replace them
at once. Locate and contact a dealer through 

www.simplicitymfg.com.

These labels are easily applied and will act as a constant
visual reminder to you, and others who may use the
equipment, to follow the safety instructions necessary for
safe, effective operation.

Decal - Operation, Upper
Part No. 1726429

OPERATION

To Start Engine:

1. Sit in seat.
2. Set parking brake to PARK.
3. Push PTO switch DOWN to off position.
4. Move ground speed levers to PARK 
    positions.
5. Move throttle/choke control fully 
    forward past detent to CHOKE position.
6. Turn key to START to crank the engine.
7. After engine starts, release the key and 
    move the throttle/choke to FAST.

To Stop Engine:

1. Move ground speed levers to PARK 
    positions.
2. Set parking brake to PARK.
3. Move throttle/choke control to FAST.
4. Turn key switch to OFF.

FORWARD TRAVEL

To Engage the Mower Deck:

1. Sit in seat.
2. Start the engine (see "To Start Engine").
3. Pull the PTO switch UP to engage 
    the mower.

To Drive:

1. Start the engine (see "To Start Engine").
2. Set parking brake to DRIVE.
3. Move the ground speed levers out of 
    PARK positions.  
4. Move levers as shown to travel.

To Disengage the Mower Deck:

1. Push the PTO switch DOWN to disengage 
    the mower deck.

PARK POSITION

REVERSE TRAVEL

LEFT TURN

RIGHT TURN

1726429

Decal - Danger/Warning, Lower
Part No. 1726430

AVOID SERIOUS INJURY OR DEATH

• READ OPERATOR'S MANUAL(S).
• KNOW LOCATION AND FUNCTION OF ALL CONTROLS.
• KEEP SAFETY DEVICES (GUARDS, SHIELDS, &
   SWITCHES) IN PLACE AND WORKING.
• REMOVE OBJECTS THAT COULD BE THROWN BY THE BLADE.
• DO NOT MOW WHEN CHILDREN OR OTHERS ARE AROUND.
• NEVER CARRY CHILDREN EVEN WITH BLADES OFF.
• LOOK DOWN AND BEHIND BEFORE AND WHILE BACKING.
• AVOID SUDDEN TURNS.
• IF YOU CANNOT BACK UP A HILL, DO NOT OPERATE ON IT.
• GO UP AND DOWN SLOPES, NOT ACROSS.
• IF MACHINE STOPS GOING UPHILL, STOP BLADE AND BACK 
   DOWN SLOWLY.
• BE SURE BLADE(S) AND ENGINE ARE STOPPED 
   BEFORE PLACING HANDS OR FEET NEAR BLADE(S).
• WHEN LEAVING MACHINE, SHUT OFF ENGINE, 
   REMOVE KEY, AND SET PARKING BRAKE.

WARNING

DO NOT TOW RIDER!

Damage may result to transmission.

ROTATING BLADES CUT 
OFF ARMS AND LEGS

STOP MOWER WHEN
CHILDREN ARE NEAR.

NO RIDERS — THEY FALL OFF.

DANGER

1726430

DANGER

OPERATING ON SLOPES
CAN BE DANGEROUS.

SEE OPERATOR'S MANUAL.

IF YOU CANNOT BACK-UP 
A HILL, DO NOT DRIVE ON IT. 

DO NOT OPERATE ON SLOPES
GREATER THAN 10˚.

Left Ground 
Speed Lever

Seat Adjust

Knob

Fuel Tank

Cap

Right Ground 

Speed Lever

Parking 

Brake

Cutting

Height
Adjust

Ignition (Key)

Switch

PTO (Mower)

Switch

Choke

(Closed)

Throttle

(Fast)

Throttle

(Slow)

>10˚

>10˚

OFF

RUN

START

Decal - Parking
Brake
Part No. 1726529

1726529

PARK

DRIVE

Decal - Ground Speed
Control - LH / RH
Part No. 1725671 / 1725670

Decal - Transmission
Release Valve 
Part No. 1726834

1725670

Decal - Cutting
Height Adjustment
Part No. 1721197

Decal - Ignition
Switch
Part No. 1726526

Decal - Danger,
Rotating Blades
Part No. 1704276

DANGER

ROTATING CUTTING BLADE

    Do not put hands or feet
      under mower deck while
        blade is rotating.

1704276

Decal - Danger,
Rotating Blades
Part No. 1704277

DANGER

        

ROTATING CUTTING BLADE

        Do not operate mower
      without deflector or entire
    grass catcher in place.

1704277

1725671

1726834

Right Wheel
(DRIVE Position Shown)

Right Wheel

Left Wheel

Left Wheel
(PUSH Position Shown)

Controls Located

Beneath Hitch

Decal - Sealed
Hydraulic System
Part No. 1726525

1726525

DO NOT OPEN RESERVOIRS!

Sealed Hydraulic System
Do Not Service

Содержание ZT 1644





































Отзывы: