CAUSE
Item on the Ironing Board is too
thick to use this pressure.
Steam Button has been pressed
too long.
Controls have not been properly set.
Water Level is too low.
PROBLEM
No Steam.
Water drips from the Pressing
Plate.
The Pressing Handle will not
move the maximum pressure
position
SOLUTION
Use lighter pressure on thicker items.
Use added steam for wrinkles.
Don
t press the Steam Button more
than 5 seconds continuously.
If suitable for the fabric, make a selection
to a higher temperature. Wait for the Steam
Ready Light to come on or use spray
misting bottle as directed.
Fill the water tank.
Page16
Simplicity Digital quik Press Instruction Manual
