![Simplicity S20PET Скачать руководство пользователя страница 7](http://html1.mh-extra.com/html/simplicity/s20pet/s20pet_owners-manual_1278073007.webp)
5
HOW TO ASSEMBLE AND OPERATE THE VACUUM
HOW TO EMPTY THE DUST CONTAINER
HOW TO ADJUST THE HEIGHT
How to Attach the Handle to the Vacuum
The vacuum and the handle are packed separately.
1. Slide the handle into the slots on top of the vacuum until it
clicks into place (Fig. 1).
2. Turn the upper cord storage hook to the upright position
and wind the power cord around the cord storage hooks
when storing the vacuum.
How to Release the Power Cord
1. The upper cord hook has a quick-release. To release the
cord, rotate the hook downward (Fig. 2).
2. Return the cord hook to the upright position before
rewinding the cord.
On/Off Switch
1. To turn the vacuum on, push the power pedal on the side of
the vacuum nozzle (Fig. 3).
2. To turn the vacuum off, push the pedal again.
Hand Held Turbo Brush
Attach the brush to the storage holder on the vacuum (Fig. 4).
Always operate the vacuum with the dust container installed.
Empty the dust container as needed or when it fills to the MAX line.
How to Empty the Dust Container
1. Unplug the vacuum. Press the dust container release button to
remove it from the vacuum (Fig. 5).
2. Press the dust container empty button to open the lid of the
container, releasing the contents into a trash bin (Fig. 6).
3. Close the dust container lid until it clicks and replace the container
into the vacuum.
How to Adjust the
Nozzle Height
Rotate the height adjustment
dial to the type of floor being
vacuumed (Fig. 7).
4
Using in upright mode / Assembly
1
Attach the tube/handle
(1)
to the main body of
the cleaner.
2
Turn the rotatable cord storage cleat
(20)
to
release the power cord
(17)
. Plug in to the mains
outlet. To keep the cord away from the floor
brush, locate in the cord hook
(3)
.
3
Settings for the
floor brush height adjustment dial (10)
Tools
Deep
pile
carpet
Deep to
medium
pile
carpet
Medium
pile
carpet
Smooth
carpet
and
hard
floors
Rotate the floor brush height adustment dial
(10)
to suit the floor being vacuumed (refer to table above).
4
Switch on the vacuum cleaner by pressing the
power pedal
(26)
.
5
Release from the upright position by pressing the
upright release pedal
(18)
with your foot.
IMPORTANT: To prevent damage to carpets,
never leave the cleaner switched on in one
place for an extended period.
6
When full, or after use, empty the dust canister
(8)
.
Press the dust canister release button
(4)
to remove
the dust canister from the vacuum cleaner.
Press the dust canister empty button
(27)
to open
the base of the dust canister, releasing the contents
into a bin or a bag. Allergy sufferers may wish to
seal the bag around the dust canister before
emptying to p revent dust escaping.
VC73420MUK Rev1_Instruction Book 30/04/2012 12:17 Page 4
4
Using in upright mode / Assembly
1
Attach the tube/handle
(1)
to the main body of
the cleaner.
2
Turn the rotatable cord storage cleat
(20)
to
release the power cord
(17)
. Plug in to the mains
outlet. To keep the cord away from the floor
brush, locate in the cord hook
(3)
.
3
Settings for the
floor brush height adjustment dial (10)
Tools
Deep
pile
carpet
Deep to
medium
pile
carpet
Medium
pile
carpet
Smooth
carpet
and
hard
floors
Rotate the floor brush height adustment dial
(10)
to suit the floor being vacuumed (refer to table above).
4
Switch on the vacuum cleaner by pressing the
power pedal
(26)
.
5
Release from the upright position by pressing the
upright release pedal
(18)
with your foot.
IMPORTANT: To prevent damage to carpets,
never leave the cleaner switched on in one
place for an extended period.
6
When full, or after use, empty the dust canister
(8)
.
Press the dust canister release button
(4)
to remove
the dust canister from the vacuum cleaner.
Press the dust canister empty button
(27)
to open
the base of the dust canister, releasing the contents
into a bin or a bag. Allergy sufferers may wish to
seal the bag around the dust canister before
emptying to p revent dust escaping.
VC73420MUK Rev1_Instruction Book 30/04/2012 12:17 Page 4
4
Using in upright mode / Assembly
1
Attach the tube/handle
(1)
to the main body of
the cleaner.
2
Turn the rotatable cord storage cleat
(20)
to
release the power cord
(17)
. Plug in to the mains
outlet. To keep the cord away from the floor
brush, locate in the cord hook
(3)
.
3
Settings for the
floor brush height adjustment dial (10)
Tools
Deep
pile
carpet
Deep to
medium
pile
carpet
Medium
pile
carpet
Smooth
carpet
and
hard
floors
Rotate the floor brush height adustment dial
(10)
to suit the floor being vacuumed (refer to table above).
4
Switch on the vacuum cleaner by pressing the
power pedal
(26)
.
5
Release from the upright position by pressing the
upright release pedal
(18)
with your foot.
IMPORTANT: To prevent damage to carpets,
never leave the cleaner switched on in one
place for an extended period.
6
When full, or after use, empty the dust canister
(8)
.
Press the dust canister release button
(4)
to remove
the dust canister from the vacuum cleaner.
Press the dust canister empty button
(27)
to open
the base of the dust canister, releasing the contents
into a bin or a bag. Allergy sufferers may wish to
seal the bag around the dust canister before
emptying to p revent dust escaping.
VC73420MUK Rev1_Instruction Book 30/04/2012 12:17 Page 4
4
Using in upright mode / Assembly
1
Attach the tube/handle
(1)
to the main body of
the cleaner.
2
Turn the rotatable cord storage cleat
(20)
to
release the power cord
(17)
. Plug in to the mains
outlet. To keep the cord away from the floor
brush, locate in the cord hook
(3)
.
3
Settings for the
floor brush height adjustment dial (10)
Tools
Deep
pile
carpet
Deep to
medium
pile
carpet
Medium
pile
carpet
Smooth
carpet
and
hard
floors
Rotate the floor brush height adustment dial
(10)
to suit the floor being vacuumed (refer to table above).
4
Switch on the vacuum cleaner by pressing the
power pedal
(26)
.
5
Release from the upright position by pressing the
upright release pedal
(18)
with your foot.
IMPORTANT: To prevent damage to carpets,
never leave the cleaner switched on in one
place for an extended period.
6
When full, or after use, empty the dust canister
(8)
.
Press the dust canister release button
(4)
to remove
the dust canister from the vacuum cleaner.
Press the dust canister empty button
(27)
to open
the base of the dust canister, releasing the contents
into a bin or a bag. Allergy sufferers may wish to
seal the bag around the dust canister before
emptying to p revent dust escaping.
VC73420MUK Rev1_Instruction Book 30/04/2012 12:17 Page 4
4
Using in upright mode / Assembly
1
Attach the tube/handle
(1)
to the main body of
the cleaner.
2
Turn the rotatable cord storage cleat
(20)
to
release the power cord
(17)
. Plug in to the mains
outlet. To keep the cord away from the floor
brush, locate in the cord hook
(3)
.
3
Settings for the
floor brush height adjustment dial (10)
Tools
Deep
pile
carpet
Deep to
medium
pile
carpet
Medium
pile
carpet
Smooth
carpet
and
hard
floors
Rotate the floor brush height adustment dial
(10)
to suit the floor being vacuumed (refer to table above).
4
Switch on the vacuum cleaner by pressing the
power pedal
(26)
.
5
Release from the upright position by pressing the
upright release pedal
(18)
with your foot.
IMPORTANT: To prevent damage to carpets,
never leave the cleaner switched on in one
place for an extended period.
6
When full, or after use, empty the dust canister
(8)
.
Press the dust canister release button
(4)
to remove
the dust canister from the vacuum cleaner.
Press the dust canister empty button
(27)
to open
the base of the dust canister, releasing the contents
into a bin or a bag. Allergy sufferers may wish to
seal the bag around the dust canister before
emptying to p revent dust escaping.
VC73420MUK Rev1_Instruction Book 30/04/2012 12:17 Page 4
Fig. 1
Fig. 2
Fig. 3
Fig. 5
Fig. 6
Fig. 7
4
Using in upright mode / Assembly
1
Attach the tube/handle
(1)
to the main body of
the cleaner.
2
Turn the rotatable cord storage cleat
(20)
to
release the power cord
(17)
. Plug in to the mains
outlet. To keep the cord away from the floor
brush, locate in the cord hook
(3)
.
3
Settings for the
floor brush height adjustment dial (10)
Tools
Deep
pile
carpet
Deep to
medium
pile
carpet
Medium
pile
carpet
Smooth
carpet
and
hard
floors
Rotate the floor brush height adustment dial
(10)
to suit the floor being vacuumed (refer to table above).
4
Switch on the vacuum cleaner by pressing the
power pedal
(26)
.
5
Release from the upright position by pressing the
upright release pedal
(18)
with your foot.
IMPORTANT: To prevent damage to carpets,
never leave the cleaner switched on in one
place for an extended period.
6
When full, or after use, empty the dust canister
(8)
.
Press the dust canister release button
(4)
to remove
the dust canister from the vacuum cleaner.
Press the dust canister empty button
(27)
to open
the base of the dust canister, releasing the contents
into a bin or a bag. Allergy sufferers may wish to
seal the bag around the dust canister before
emptying to p revent dust escaping.
VC73420MUK Rev1_Instruction Book 30/04/2012 12:17 Page 4
Fig. 4