10
Hob control elements for
both left cooking zones
Cooking time function
For both left cooking zones the cooking time can be set. When the countdown
cooking time expired the gas on selected burner is turned off.
Cooking time can be set from 1 to 99 minutes.
Time function settings
•
Turn on the gas cooking zone.
•
Touch with finger the sensor key
on the knob for around 2 seconds. The
number „-00+“ appear on display and also a short tone.
•
By pressing the + and – key set the desired cooking time. At beginning the step is
1 minute and when pressing the longer time change to 10 minutes step. If the first
press is on „-„ key then the value go on number „99“ and then decreases.
•
When set the desirous time, after 5 seconds the „- and +“ disappears and
countdown start.
•
When the value drops to 00 then starts blinking and acoustic sound is appearing.
Gas burner is shut down. Acoustic signal is switched off when you press any key
or after one minute shuts of itself.
Change the setting value
Touch the sensor key
for around 2 seconds. On display appear „+ and –„. Now
you can change the setting.
Early switch off the time
At early switch off the gas flow is not interrupted.
You can turn off in different ways:
•
Set the setting by „-„ key to value „00“.
or
•
Simultaneously press the + and – buttons for around 2 seconds.
Value moves to 00.
•
By touching the sensor key
for 2 seconds, the setting erases.
WARNING: In case of electrical blackout, the timer turns off, but the flame is
still on.
Ignition and operation of
the burners
User’s instructions
This appliance must be used for the purpose it was designed for, i.e. domestic
cooking. Any other use is considered to be improper and therefore dangerous.
The manufacturer will accept no liability for any damage caused by improper,
incorrect or irrational use.
Using the burners
• If the burners are not used for several days, wait a few seconds before lighting
them in order to release any air from the pipes.
• As the cook top burners are fitted with an automatic ignition, to light them simply
press and turn the handle to the small star. The appliance uses a spark ignition
generator.
• If the flame does not ignite within five seconds, turn the knob back to the 0 position
and repeat the procedure; if the electric ignition should not work due to a power
failure or damp spark plugs, the gas can also be ignited using a match or a gas
lighter.
• For models with a safety tap (which interrupt the gas flow should the flame
accidentally go out) the burners are ignited as described above, but ensure the
knob is pressed in for 5 to 6 seconds after the flame has ignited. After this
time, which gives the safety device enough time to cut-in, the flame will be on
Содержание GKTG6SY2B
Страница 1: ...1 en...
Страница 14: ...14...
