manualshive.com logo in svg

Simplicity Cobalt 5900763, Руководство оператора

Поделиться
Скачать
Simplicity Cobalt 5900763 Скачать руководство пользователя страница 2

Thank you

 

for purchasing this quality-built Simplicity product.  We’re pleased that you’ve placed your 

confidence in the Simplicity brand.  When operated and maintained according to the instructions in this 
manual, your Simplicity product will provide many years of dependable service.

This manual contains

 

safety information to make you aware of the hazards and risks associated with 

this machine and how to avoid them. This machine is designed and intended to be used and maintained 
according to the manual for finish cutting of established lawns and is not intended for any other purpose. 
It is important that you read and understand these instructions thoroughly before attempting to start or 
operate this equipment.

Briggs & Stratton Power Products Group, LLC. 
Copyright © 2008 Briggs & Stratton Corporation 

 

Milwaukee, WI, USA.  All rights reserved.

The Simplicity logo is a trademark of Briggs & Stratton 
Corporation Milwaukee, WI, USA.

Contact Information:

Simplicity Manufacturing, Inc.
P.O. Box 997
500 N. Spring St.
Port Washington, WI 53074-0997
www.simplicitymfg.com

DATE PURCHASED

See 

Features & Controls

 for the location of Identification Numbers

WARNING

The engine exhaust from this product contains chemicals 
known to the State of California to cause cancer, birth 
defects, or other reproductive harm. 

WARNING

Battery posts, terminals, and related accessories contain 
lead and lead compounds – chemicals known to the State 
of California to cause cancer and reproductive harm.  
Wash hands after handling.

PRODUCT REFERENCE DATA

Unit MODEL Number

Unit SERIAL Number

Mower Deck MODEL Number

Mower Deck SERIAL Number

Dealer Name

Date Purchased

ENGINE   REFERENCE   DATA

Engine Make

Engine Model

Engine Type/Spec.

Engine Code/Serial Number

Содержание Cobalt 5900763

















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды