Simplicity Broadmoor 2600 Series Скачать руководство пользователя страница 20

Страница: 20 / 40

Regular Maintenance

Figure 21. Lubricating the Tractor

LUBRICATION

Lubricate the unit at the locations shown in Figures 21
through 25 as well as the following lubrication points.

Grease:

• front axle pivot
• front axle grease fittings
• steering linkage
• foot pedal
• mower pivots
• mower arbors
• transmission idler assembly pivot

Use grease fittings when present. Disassemble parts
to apply grease to moving parts when grease fittings
are not present.

Not all greases are compatible. Simplicity Lithium
Grease is recommended, automotive-type lithium
grease may be used when this is not available.

Oil:

• hydro linkage
• seat adjustment assembly
• brake linkage
• frame pivot points
• mower deck height adjustment linkage

Generally, all moving metal parts should be oiled
where contact is made with other parts. Keep oil and
grease off belts and pulleys. Remember to wipe fit-
tings and surfaces clean both before and after lubri-
cation.

Figure 23. Brake Pedal Pivot Point

Figure 22. Lubricate Steering Linkage

Содержание Broadmoor 2600 Series









































Результаты поиска

Содержание Broadmoor 2600 Series

Отзывы:

Бренды по названию

Популярные бренды

Simplicity Broadmoor 2600 Series, Руководство оператора

Результаты поиска

Содержание Broadmoor 2600 Series

Отзывы:

Бренды по названию

Популярные бренды