background image

ENGINE REFERENCE DATA

1

Table Of Contents

SAFETY RULES

General ...................................................................2

Preparation .............................................................2

Operation ................................................................3

Maintenance & Storage ..........................................3

Safety Decals ..........................................................4

CONTROL REFERENCE CHART

Snowthrower Controls.............................................5

Engine Controls ......................................................5

CONTROLS

Starting Controls .....................................................6

Ground Speed Controls ..........................................7

Auger Control ..........................................................7

Deflector Controls ...................................................7

Scraper Height Control ...........................................7

Traction Lock Control ..............................................7

OPERATION

General ...................................................................8

Checks Before Each Start-Up .................................8

Starting The Engine ................................................9

Operating The Snowthrower ...................................9

Engine Speed .......................................................10

Ground Speed Selector ........................................10

Deflector................................................................10

Scraper Bar & Skid Shoes ....................................10

Free Wheeling and Traction Drive Lock................11

After Each Use ......................................................11

REGULAR MAINTENANCE

Normal Care Chart ................................................12

Off-Season Storage ..............................................12

Starting After Storage ...........................................12

Checking Auger Gear Case Lubrication ...............12

Lubrication ............................................................13

SERVICE 

Troubleshooting .............................................14 - 15

Speed Selector Pivot Adjustment .........................16

Traction Drive Clutch Rod Adjustment ..................16

Auger Drive Clutch Rod Adjustment .....................17

Drive Belt Adjustment ...........................................17

Adjusting Auger Drive Belt ....................................18

Adjusting Auger Belt Guide ...................................19

Replacing Drive Belts............................................19

Replacing Auger Drive Belt ...................................20

Roller Chain Replacement ....................................21

Shear Pin Replacement ........................................21

Auger Shaft Bearing Replacement .......................21

Discharge Chute Worm Assy. Adjustment ............22

Discharge Chute Control Rod Gear Adjustment ...22

Checking Tire Pressure ........................................22

SPECIFICATIONS ......................................................23

REPLACEMENT PARTS & ACCESSORIES ............ 24

TECHNICAL MANUAL AVAILABILITY .....................24

For easy reference, please record the infor-

mation on the chart below.

The Snowthrower Reference Data can be found on the
identification tag located on the unit’s rear frame.

(Refer

to the Engine Owner’s Manual for location of engine
information serial number.)

WARNING

You must read, understand and comply with all safe-
ty and operating instructions in this manual before
attempting to set-up and operate your snowthrower.

Failure to comply with all safety and operating
instructions can result in loss of machine control,
serious personal injury to  you and /or bystanders,
and risk of equipment and property damage. The tri-
angle in the text signifies important cautions or warn-
ings which must be followed.

WARNING

Engine exhaust from this product contains chemicals
known, in certain quantities, to cause cancer, birth
defects, or other reproductive harm.

Model Description/Number

M/N (Manufacturer’s Number)

SNOWTHROWER  REFERENCE  DATA

S/N (Serial Number)

Dealer Name

Date Purchased

Engine Make/Model

Engine ID/Serial Number

© Copyright 1998 Simplicity Manufacturing, Inc.  All Rights Reserved.  Printed In USA.

TP 100-2062-03-IW-S

2062-03

Содержание 1693161





























Отзывы: