19/21
FURNITURE ANTI-TIPPING RESTRAINT ASSEMBLY
1.
Attach one of the mounting brackets securely to the back edge of
the furniture. Use the shorter screw.
2.
Determine where furniture is to be placed and mark location on
the wall for mounting bracket screw hole approximately 2 inches
below the bracket mounted to the furniture.
3.
Drill a 3/16 inch hole in the wall. Press the plastic anchor into the
hole and gently tap until the flange on the anchor is against the
wall surface.
4.
Position the bracket over the anchor and use the longer screw to
securely attach the bracket to the wall.
5.
Place the furniture so the back edge is in line with the bracket on
the wall.
6.
Lace an end of the nylon restraint down through each bracket.
Bring both ends together and slide the beaded end of the strap
through the keyhole shaped slot in the other end until snug. Pull
down on the beaded end until it snap locks into the keyhole slot.
7.
To double lock, return the beaded end back through the keyhole as
shown.
8.
Check to make sure the strap is securely laced and locked to the
brackets.
●
DO NOT
place heavy objects in top drawers
●
DO NOT
let children climb or hang on drawers, doors or shelves
Furniture Anti-Tipping Restraint Instructions:
