ASSEMBLY
STEP 3
1. Insert Dowel 6 into Divider C .
2. Use rubber mallet to tap Dowels 6 into bottom of holes securely. 1/2 length of
Dowels should be exposed.
3. Align pre-drilled holes on bottom of Front D with Dowel 6 on Divider C .
4. Using 2 Phillips Screws 8 to attach Divider C to the middle bar on Front D .
NOTE
: The screwdriver is not
included in the hardware pack.
10/16
MODEL
# AXCAB-BNCH-B
6
D
C
8
8
