10/18
ASSEMBLY
STEP 4
1. Insert 16 Wood Dowels 7 into 4 Dividers H ( 4 Dowels per each Divider ).
2. Use rubber mallet to tap Dowels 7 into bottom of holes securely. ½ length of
dowels should be exposed.
3. Hold Bottom Shelf C upright and attach 4 Dividers H by inserting exposed dowel
ends into matching pre-drilled holes on Bottom Shelf C .
4. Insert 4 Phillips Screws 5 into pre-drilled holes through centre of Bottom Shelf C
into Dividers H and use Phillips screwdriver to snugly tighten. Do not over-tighten.
5. Align exposed dowels of Dividers H to holes on Bottom Support D .
6. Insert 4 Phillips Screw 5 into pre-drilled holes in centre of Bottom Support D and
use Phillips screwdriver to snugly tighten. Do not over-tighten.
H
H
H
H
C
D
5
7
7
7
7
H
5
5
MODEL
# INT-AXCSM-BNCH-EB
