background image

•  Do not use abrasive cleaners 

•  Dust with soft dry cloth
•  Do not use liquid or aerosol products 

•  For soil build-up, wipe with damp cloth & dry 

•  To avoid marking, do not place rubber on surface (foot pads, etc.) 

This furniture is designed for indoor use.

To help protect your wood furniture, take these steps:

Perhaps the greatest environmental damage to wood furniture comes from wide swings in 
relative humidity (RH) in our homes. Wood absorbs and desorbs water as relative humidity 
rises and falls, and in doing so it swells and shrinks. Making matters worse, it expands and 
contracts unequally along different grain directions. As humidity changes, the components 
of wooden objects are continually pushing and pulling against each other. This pressure 
often results in parts of furniture no longer fitting together closely or becoming distorted 
or breaking from their own internal stresses. 

The response to relative humidity changes begins with determining the annual average RH 
for your particular space. Then try to keep the RH in the space where your furniture is as 
close to that average as possible, generally within about 10% up or down. De-humidify in 
the summer and humidify in the winter. 

Be aware that raising the temperature lowers the humidity and vice versa. Thus, modern 
heating systems, which can drive down interior RH in the winter, almost invariably cause 
problems for furniture. To counteract their effect, you can either modify the RH by keeping 
furniture containing spaces cooler in the winter or most importantly, have a good working 
humidifier for your home. A humidistat automatically works to balance the humidity in 
your home so it is constant. Dry indoor air can suck enough moisture from its surroundings 
to do permanent damage to wood, causing it to crack or split.

Remember, that not all woods are created equal. Two factors that help determine how 
rapidly a wood will lose moisture are pore size and surface hardness. A piece made from a 
dense and hard wood will dry less rapidly than pieces made from softer woods.

Furniture that is sealed and lacquered will lose moisture more slowly than an unfinished 
piece while pieces with veneer finishes are not only stronger but lose moisture more 
slowly than other finishes.

•  Use a humidifier, preferably one with an automatic control system that can sense the 

humidity level and adjust itself accordingly 

•  Don't over-humidify; that can damage wood by causing it to expand and contract
•  Keep furniture out of direct sunlight, which can cause it to dry out, crack and warp
•  If you can avoid it, don't put furniture near heating vents; if you can’t, keep the item 3 to 

4 inches away from the wall, giving the heat and air space to circulate

Care & Maintenance

6

Содержание brooklyn+max WyndenHall AX2370-RNAB

















Отзывы: