ASSEMBLY
STEP 3
9/14
MODEL
# AXCBEN002
C
F
1. Screw 2 threaded Cam Lock Pins 2 into pre-drilled holes on
the back of Front Panel C .
2. Screw only to where the threading ends and ensure they are straight. Do not use
excessive force to over-screw cam lock pin.
3. Align threaded cam lock pins in Panel C to the 2 pre-drilled holes leading to the
round cam lock inserts in Divider F . End bottom panel must be located in the groove
of the Front Panel C .
4. Ensure alignment mark on cam lock insert point to exposed cam lock pin.
5. Use flathead screwdriver to turn cam lock inserts to ensure top of cam lock pin and
panels fit flat together.
6. Use flathead screwdriver to tighten cam lock ½ turn and feet it lock securely in place.
Do not over-tighten.
2
NOTE
: The screwdriver is not
included in the hardware pack.
Up
Sid
e /
Ve
rti
ca
l
