3
S4906-0007-7 8/2014
Compatible Controller
Data Sheet
Reference
Controller
Output
IDNAC SLC
Output Voltage
Appliance Voltage
Design Reference
4100ES with EPS+ or EPS Power Supply
S4100-0100
IDNAC SLC
29 VRMS
(regulated)
23 VRMS
(with 6 VRMS drop)
4009 IDNAC Repeater
S4009-0004
Common Specifications
(see page 2 for appliance dimensions)
Environmental
32° to 122° F (0° to 50° C); 10% to 93%, non-condensing at 100° F (38° C)
Connections
Terminal blocks for 18 AWG to 12 AWG (0.82 mm
2
to 3.31 mm
2
); two wires per terminal for in/out wiring
Installation Instructions
579-828
Strobe Specifications
Typical Operating Voltage Range
23 VRMS to 31 VRMS, Special Application (see below for 17 VRMS rating)
Flash Rate and Synchronized SLC Loading
1 Hz; with up to 46 synchronized strobes maximum per NAC; maximum 30
Ω
resistance between appliances
23 VRMS
Current Ratings,
for connection to IDNAC
Addressable SLCs
Candela Setting
15 cd
30 cd
75 cd
110 cd
60 mA
92 mA
180 mA
240 mA
Compatible Controller
Data Sheet
Reference
Controller
Output
Available Strobe
Intensity
Appliance
Voltage Minimum
4100ES or 4100U with TrueAlert Power Supply
S4100-0031
TrueAlert
Addressable SLC
15, 30, 75, and
110 cd
17 VRMS
4009 TPS, Remote TrueAlert Power Supply
S4100-0037
TrueAlert Addressable Controller (4009T)
S4009-0003
Electrical Ratings Difference for Retrofit Applications
Voltage Range 17 VRMS to 31 VRMS, Special Application
17 VRMS
Current Ratings,
use when connected to
TrueAlert Addressable SLCs
per above
Candela Setting
15 cd
30 cd
75 cd
110 cd
76 mA
128 mA
242 mA
328 mA
15
110 75 30
F
ACP
Strobe intensity viewing slot
Intensity selection plug,
accessible only from rear of lens
housing; factory setting is FACP,
controlled by panel
4905-9910 Adapter Plate, required for surface
mount with handy box unless using the 4905-9926
wire guard
Handy box, 1-1/2" ( 38 mm) deep (RACO 650 or
equal) or single gang box, 2-1/2" (64 mm) deep
(RACO 519 or equal) supplied by others
Also can be attached to boxes mounted to drop
ceiling T-bar with clips (ERICO No. 512 or equal)
Ceiling mount strobe
Optional 4905-9926 wire
guard with mounting plate
Magnetic
test location
Bottom view
LED indicator
Address setting DIPswitch is behind strobe
assembly, select address and strobe
candela setting before inserting into housing
Single gang box (Wiremold V5744S)
2-1/4" (57 mm) deep, supplied by others
TrueAlert Amber Strobe and IDNAC SLC Controller Compatibility Reference
Specifications
TrueAlert Strobe LEGACY Compatibility Reference
Ceiling Mount V/O and Guard Installation Reference
