Simplex 6500 Скачать руководство пользователя страница 8 | Manualshive

Страница: 8 / 37

background image

FRONT PANEL DESCRIPTION

ALPHANUMERIC DISPLAY - Used for displaying time, day, date, and output status, and for displaying
information during programming or reviewing stored programs. In the normal mode of operation, the display will
be in the TIME DISPLAY, showing the day, time, and which relays are activated. When programming you can
enter the TIME SET, MANUAL CONTROL, and PROGRAMMING MODES from keypad and it is shown on this
display.

MANUAL OVERRIDE SWITCHES – Used to select the relay operation. Each relay can be set for program
control “AUTO” position, or can be set to “ON” of “OFF” to override the programmed operation.

KEYBOARD - Many keys serve multiple functions. Those keys are clearly labeled with their functions to the side
and top of the key. They cannot be used incorrectly, as the display will AUTO PROMPT the user as to which
key to press.

AM / ON KEY [1] - Used for setting the time to AM when in the TIME SET or PROGRAMMING MODES and for
entering the MANUAL CONTROL MODE.

PM KEY [2] - Used for setting the time to PM when in the TIME SET or PROGRAMMING MODES.

TIME KEY [3] - Used for entering the TIME SETTING MODE.

ANNUAL KEY [A] - Used for entering the ANNUAL PROGRAMMING MODE and for entering the stored
ANNUAL program for review. The ANNUAL program contains the schedule for the alternate BASIC programs
in calendar schedule form.

BASIC KEY [B] - Used for entering the BASIC program - PROGRAMMING MODE and for entering the stored
BASIC program for review. The BASIC program contains the daily timed events instructions.

CLEAR KEY [C] - Used for clearing the ANNUAL program and/or BASIC program.

DATE KEY [D] - Used for entering the SET DATE MODE for entering date or reviewing the date.

EXIT KEY [F] - Used for exiting any of the SET TIME, SET DATE or PROGRAM MODES.

OFF KEY [0] - Used for setting the pulse to OFF when in the PULSE PROGRAMMING MODE.

ENTER KEY [E] - Used for entering all commands or for SET TIME, SET DATE or PROGRAM data entry.

DST KEY [7] - Used for entering the SET DAYLIGHT SAVINGS TIME PROGRAM MODE.

8

«
...
6
7
8
9
10
...
»

Содержание 6500






































Отзывы:

Нет отзывов

Похожие инструкции для 6500

Бренд: Velleman Страницы: 16

Бренд: Bigben Страницы: 84

Бренд: Timex Страницы: 8

NS-C2000 - AM/FM Clock Radio

Бренд: Insignia Страницы: 50

Бренд: Epson Страницы: 34

Бренд: Epson Страницы: 61

Бренд: Epson Страницы: 52

Бренд: Crosley Страницы: 6

Бренд: Qudo Страницы: 10

Бренд: SOUNDMASTER Страницы: 80

Бренд: SOUNDMASTER Страницы: 61

Бренд: NGS electonics Страницы: 44

Бренд: Davtron Страницы: 2

Бренд: TFA Страницы: 2

Бренд: TFA Страницы: 17

Бренд: iHome Страницы: 12

Бренд: Eurochron Страницы: 8

Бренд: Eurochron Страницы: 8

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды