Simplex 4100U-S1, Руководство оператора

Страница: 38 / 86

5-2
Every system point is part of the “Select a List of Points” list in the main menu. All points can be
displayed sequentially by address order using this list option. To facilitate a search for a particular
point, lists may be selected by point category (monitors, signals, auxiliary, input/output, pseudo
points, etc.). A list of points may be selected, then scrolled through by using the <NEXT> and
<PREVIOUS> keys.
The following lists are available for selection from the “Select a List of Points” option from the
Main Function Menu:
•
All Monitor Points
•
All Signal Points
•
All Auxiliary Relay Points
•
All Auxiliary Feedback Points
•
All Zones of 24-Point I/O Card
•
All Digital Pseudo Points
•
All Analogue Pseudo Points
•
All List Pseudo Points
•
All Points by Address List
•
All Network Points.
1. Press the <MENU> key to enter the panel’s menu system.
2. Press the <NEXT> key until the alphanumeric display reads as follows:
3. Press <ENTER>. The display reads as follows:
4. Press the <NEXT> key to scroll through the categories of points until the appropriate category
is shown. Press the <ENTER> key. The first point in the selected category appears. In the
example below, the point shown is the first one in the monitor zone category.
5. Press the <NEXT> key to scroll through the list of points in the category. When the point that
you want to select is displayed, press <ENTER>.
Selecting Points from the Menu
Overview
Procedure
Press <NEXT> or <PREVIOUS> to scroll
Select a List of Points?
Press <ENTER> to select a list of points
All Monitor Zones?
MONITOR CARD 1 ZONE NUMBER 1
FIRE MONITOR ZONE NORMAL