XPS and XNAC
Installation Instructions
2005-2011 SimplexGrinnell LP. All rights reserved.
Specifications and other information shown were current as of publication and are subject to change without notice.
Simplex and the Simplex logo are trademarks of Tyco International Ltd. and its affiliates and are used under license.
574-772
Rev. K
This publication describes the installation procedure for 4100-5101 (120 VAC), 4100-5102
(220/230/240 VAC), and 4100-5103 (120 VAC with battery disconnect) Expansion Power
Supplies (XPSs), and the 4100-5115 Expansion NAC Module (XNAC).
This product is compatible with 4100U and 4100ES Fire Alarm Control Panels (FACP).
IMPORTANT:
Verify FACP System Programmer, Executive, and Slave Software
compatibility when installing, or replacing system components. Refer
to the Technical Support Information and Downloads website for
compatibility information.
This publication discusses the following topics:
Topic
See
Page #
Cautions and Warnings
2
Expansion Power Supply Modules
3
The Expansion Power Supply (XPS)
4
Step 1. Mounting the XPS
6
Step 2. XPS Configuration
7
Step 3. Internal Wiring
9
Step 4. XPS Field Wiring
13
Step 5. Installing the XNAC
20
Step 6. Troubleshooting
21
Connecting Additional Power to Motherboards
22
Table 5
23
Table 6
26
Introduction
In this Publication
firealarmresources.com
Содержание 4100-5101
Страница 30: ...574 772 Rev K firealarmresources com...