4090-9116 Addressable IDNet Isolator Installation Instructions
574-872
Rev. G
Install the Addressable IDNet Isolator into a grounded 4-inch U.L.-Listed back box (not
supplied) using Figure 6 as a reference. Mount the Addressable IDNet Isolator to the
back box as follows:
1.
Loosen the two screws on the square back box.
2.
Mount the Addressable IDNet Isolator to the back box using the teardrop holes on the
mounting bracket.
3.
Secure the Addressable IDNet Isolator to the back box using the two #8/32 panhead
screws.
Note:
Simplex offers semi-flush and surface covers (ordered separately) with a
light pipe. The cover(s) with light pipe allow viewing of the
communications LED without taking the cover off. Installation of the
4090-9806 semi-flush cover and 4090-9807 surface cover are detailed in
publication
4090 IDNet
™
Semi-Flush/Surface Covers and IAM Bracket
Installation Instruction (574-796).
Figure 6. Addressable IDNet Isolator Back Box Installation
Mechanically
Installing the
Addressable IDNet
Isolator
UL Listed
4-Inch Square
(2-Inch Deep
Back Box
(Not Supplied)
Cover
(Not Supplied)
4090-9116
Addressable IDNet Isolator
#8/32 Flathead Screw
(Not Supplied)
#8/32 Panhead Screw
(Not Supplied)
