Simplex 4007ES Panels, Руководство программиста

Страница: 41 / 168

6-5
4007ES Panel Programmer Manual ( 579-1167)
Editing Standard Component Properties, Continued
Editing the Color
User Interface To edit the Display Options tab (Figure 6-5): If
needed, check the Reverse Display of custom label and
status line.
To use custom external files for the primary
and/or the alternate MsgLib:
1. Click on
Import .
2. Browse to import the appropriate MsgLib.
3. Click on
Open .
4. Edit the Name and Date fields.
By default, the S
ystem is Normal image is displayed. To
edit this image:
1. Check the Enable Custom Image check box.
2. Click on
Import Image...
3. Browse to select the appropriate image.
4. Click on
Open > Apply .
Figure 6-5. Color User Interface - Display Options
To edit the Access Levels tab:
The Access Level tab of the color
user interface card cannot be edited.
You can view the access level for the
various functions in the system, but
cannot change them.
Figure 6-6. Color User Interface - Access Levels
Editing the IDNAC
Power Supply The IDNAC Power Supply is part of the 4007ES Hardware Configuration. It has five main tabs
to edit. The Card Properties tab, the Data Entry tab, the AuxNAC tab, the Aux Relay tab, and
the Point Editing tab. For more information on the 4007ES Hybrid power supply, refer to the
Editing the NAC Power Supply section.
To edit the Card Properties tab:
1. Enter the card’s custom label. This label should make the card easily identifiable.
The following fields in the tab are filled by the programmer and cannot be edited:
• Card address
• Card description
• Card default label
• Annunciator address
• Unit number
• Box number
• Bay number
• Location