86
Managing SimpleShare
Disk Pool
6
To set the capacity of the new pool manually, complete
the following steps:
•
In
Pool Mapping Preference
, select
Manual
Configuration
.
•
In
Disk Assignment
, select the
Use
checkbox for
each disk being used to create the pool.
•
In
Space Allocation
, enter the size (in gigabytes) of
the pool. The pool size can be set using the text box
or the slider control.
7
Click .
Disk Assignment allows you to specify which disk drives are
to be used by the pool being created. To create a pool that
only occupies a portion of a single disk, make sure to only
select the Use checkbox for the drive you want to use.
If multiple disks are connected to SimpleShare, by default the
Space Allocation selects all available drives. This results in
all available space on each drive being allocated to the new
pool being created. To remove disks from the pool being
created the Manual checkbox must be selected and the Use
checkbox for the drives that are not to be included in the pool
must be deselected.
Create Pool