simplehuman KT1078, Руководство по установке

Страница: 2 / 5

1
3
2
quick start
• remove battery cover
at base of pump with
screwdriver
• insert 4 AA batteries
as shown
• twist off the lid on top
of the chamber to fill
Note:
Do not use soap
with exfoliants.
• turn dial at base of pump
to setting 4
• press and hold the top
button behind the reservoir
lid until soap comes out
insert batteries
prime the pump
fill the reservoir
troubleshooting tip
If soap isn’t coming out, air pressure may be
blocking the valve. Try giving the little tab under
the nozzle a gentle tug to allow air through.
Be careful: Don’t pull out the tab!
adjust the volume
To change the amount dispensed,
turn the dial at the base of the
pump to the desired setting.
activate 20-second wash timer
Turn dial to OFF position. Press and hold top button, then turn dial to
any setting.
The blue light will flash continuously when it’s
time to replace the batteries.
low battery alert
setting
1 thin soap
3 thick soap, lotion, or sanitizer
2 standard soap or sanitizer
4
large amount of soap, lotion or sanitizer
recommended use
OFF