Manfactured by:
TM
RE-SET
If Rosie malfunctions, re-setting usually solves any problem. Re-setting will NOT erase reminders and reminder times, but will
erase the time, date and alarm times. To re-set Rosie: 1. Unplug 2. Remove all 3 AAA batteries. 3. Plug Rosie back in. You will
hear the ‘auto introduction’. To skip the introduction, press Rosie down 2-3 times firmly to return Rosie to sleep mode. 4. Now
place 3 AAA batteries back in Rosie 5. Re-set the time, date (and alarm time and alarm sound).
MAINTENANCE
A soft cloth or a paper towel may be used to clean your clock.
SAFETY INSTRUCTIONS
The apparatus shall not be expose to dripping or splashing or near a bathtub. The appliance should be situated away from heat
sources such as radiators, heat registers, stoves, or other appliance (including amplifiers) that produce heat. The power supply
cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, or chewed
by pets. To avoid the risk of electric shock, do not remove the cover of the apparatus. There are no user serviceable parts inside.
Do not operate this product if the main lead is damaged. Please read the instruction manual before use and retain for future
reference. During electrostatic discharge, the product may auto-reset then adjust the mode to return normal operation.
WARNING
This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
WARRANTY AND COMMENTS:
The 6 MONTH WARRANTY IS LIMITED TO THE REPAIR OR REPLACEMENT OF DEFECTIVE PARTS ONLY. In no event will Simpl
Technology LLC., its representatives, affiliates, associates and the like be liable for any damages, including without limitation
direct or indirect, special, incidental, punitive or consequential damages, losses or expenses arising in connection with any failure
of performance of Reminder Rosie.
Please do not return Rosie to the reseller you purchased from. Contact us, the manufacturer,
Simpl Technologies LLC at [email protected] or call 1-833-237-4675 ( Press 1)
The US Warranty address: Simple Technology, 340 Royal Poinciana Way, Suite 317/317, Palm Beach, Florida 33480.
Canadian address: Simple Technology, 100 Hanlan Rd. #3, ON Canada L4L 4V8
4
