background image

PRUDENCE

Fire hazard posed by batteries

The batteries used may pose a fire or burn hazard if handled incorrectly.

1. Do not try to charge, open, heat or burn the batteries.

2. Do not short-circuit the batteries.

IMPORTANT

Damage resulting from electrostatic discharge (ESD)

This product contains electronic components that may be damaged by electrostatic discharges.

1. Use ESD-compliant working materials (e.g. Grounding strap).

2. Ground yourself before carrying out any work that could bring you into contact with the

electronics. For this purpose, touch earthed metallic surfaces (e.g. door frames, water pipes
or heating valves).

Damage resulting from liquids

This product contains electronic and/or mechanic components that may be damaged by liquids
of any kind.

Keep liquids away from the electronics.

Damage resulting from aggressive cleaning agents

The surface of this product may be damaged as a result of the use of unsuitable cleaning agents.

Only use cleaning agents that are suitable for plastic or metal surfaces.

Damage as a result of mechanical impact

This product contains electronic components that may be damaged by mechanical impacts of
any kind.

1. Avoid touching the electronics.

2. Avoid other mechanical influences on the electronics.

Damage due to polarity reversal

This product contains electronic components that may be damaged by reverse polarity of the
power source.

Do not reverse the polarity of the voltage source (batteries or mains adapters).

Operational malfunction due to radio interference

This product may be affected by electromagnetic or magnetic interference.

Do not mount or place the product directly next to devices that could cause electromagnetic
or magnetic interference (switching power supplies!).

Padlock AX

 (Manual)

1. General safety instructions

4 / 26

Содержание Padlock AX



























Отзывы: