1 Intended use
Digital SimonsVoss Locking Cylinder 3061 are installed in designated door
locks, such as DIN mortise locks, to integrate them into a digital locking
system.
The digital Locking Cylinder 3061 may only be used for its intended purpose
in a designated door locking device. No other use is permitted.
Digital Locking Cylinder 3061s are available in various lengths. The selection
of the proper size is of significance. The length of the locking cylinder is
printed on the packaging and can be measured at any time. If the cylinder is
too short, the handles cannot be fitted. If the cylinder is too long, it may be
ripped out of the locking device. The may not protrude more than 3 mm on
each side of the door to ensure proper operation.
The product may not be changed in any way, other than in compliance with
the changes described in the instructions.
Digital Locking Cylinder 3061
(Manual)
1. Intended use
5 / 54
