background image

3

1. I

mportant

 p

recautIons

IMPORTANT, RETAIN FOR FUTURE 

REFERENCE AND READ CAREFULLY!

Do not attempt to install or operate this device until you have read 
the safety instructions in this manual. Safety items throughout 
this manual are labelled with 

Danger

Warning

, or 

Caution

 

depending on the risk type.

1.1 Definitions

 

This is the safety alert symbol. It is used to alert you to 

potential personal injury hazards. Obey all safety messages that 
follow this symbol to avoid possible injury or death.

 DANGER

Indicates an imminently hazardous situation which, if 

not avoided, will result in death or serious injury.

  WARNING

Indicates a potentially hazardous situation which, if 

not avoided, could result in death or serious injury.

 CAUTION

Indicates a potentially hazardous situation which, if 

not avoided, could result in minor or moderate injury.

  IMPORTANT

Installation, operation, or maintenance information 

which is important but not hazard-related.

1.2 Safety Warnings

  DANGER

To reduce the risk of fire, electric shock, explosion or injury to 
people, read the following:

 

This product is intended for domestic outdoor use only.

 

The water spray must never be directed 
towards any electric wiring, devices, or 
directly towards the pressure washer itself, 
or fatal electric shock may occur.

 

The pressure washer should not be used in areas where 
gas vapours may be present. An electric spark could cause 
an explosion or fire.

 

Risk of explosion. 

When a combustible liquid is sprayed, 

there can be danger of fire or explosion, especially in a 
closed area. Therefore, do not spray flammable liquids. Do 
not use acids and solvents with this product either. These 
products can cause physical injuries to the operator and 
irreversible damage to the device.

 

Risk of electric shock.

 Inspect the cord before using the 

device — do not use it if the cord is damaged.

 

Risk of injury. 

Do not direct the water 

flow at people. The high-pressure jet can be 
dangerous if misused, and therefore must 
not be directed at people, animals, electrical 
devices or the unit itself.

 

This device is capable of producing high pressure as rated 
in the 

Technical Specifications

. To avoid rupture and 

injury, do not operate this machine with components 
rated less than the unit itself (including but not limited to 
spray guns, hose, and hose connections).

Important Precautions

Содержание 039-8701-4



















Отзывы: