Simoniz 039-8593 Скачать руководство пользователя страница 4

6

7

1.2 Safety Warnings

  CAUTION - SPECIFIC SAFETY ADVICE

 

Avoid dangerous conditions. Always operate this product 
on a dry, solid and level ground.

 

Never operate this product on slippery, wet, muddy, or 
icy  surfaces.  The  operating  area  should  be  free  from 
any  obstructions.  There  should  be  plenty  of  room  for 
handling, and the operator should stay alert at all times.

 

Do not use this product in wet or damp areas or expose 
it to rain. Do not use it in areas where fumes from paint, 
solvents or flammable liquids pose a potential hazard.

 

Inspect  this  product.  Check  before  turning  it  on.  Keep 
guards  in  place  and  in  working  order.  Form  a  habit  of 
checking  to  see  that  keys  and  adjusting  wrenches  are 
removed from tool area before turning it on.

 

Replace damaged, missing or failed parts before using it. 
Make sure all nuts, bolts, screws, hydraulic fittings, hose 
clamps, etc. are securely tightened. Always check the oil 
level  in  the  oil  tank.  Never  operate  this  product  when 
it needs to be repaired or when it is in poor mechanical 
condition.

 

Never  move  or  pull  this  product  while  the  engine  is 
running.

 

Do not run the engine at a high speed when you are not 
using the product.

 

Risk  of  electric  shock! 

The  water  spray 

must never be directed towards any electric 
wiring,  devices,  or  directly  towards  the 
pressure washer itself, or fatal electric shock 
may occur.

 •

Risk of injury! 

Do not direct the discharge 

stream at people. The high-pressure jet can 
be  dangerous  if  misused,  and  therefore 
must  not  be  directed  at  people,  animals, 
electrical devices or the unit itself.

 

Risk of explosion! 

When a combustible liquid is sprayed, 

there can be danger of fire or explosion, especially in a 
closed area. Therefore, do not spray flammable liquids. 
Do not use acids and solvents with this product either. 
These products can cause physical injuries to the operator 
and irreversible damage to the product.

 

Learn how to stop the product and release the pressure 
quickly. Familiarize yourself with the controls.

  CAUTION - SPECIFIC SAFETY ADVICE

 

This  product  is  capable  of  producing  high  pressure  as 
rated in the 

Technical Specifications

. To avoid rupture 

and injury, do not operate this product with components 
rated less than the unit itself (including but not limited to 
spray guns, hose, and hose connections).

  WARNING - INJECTION HAZARD

 

Equipment can cause serious injury if the spray penetrates 
the skin. Do not point the gun at anyone or any part of the 
body. In case of penetration, seek medical aid immediately.

  CAUTION - DETERGENTS

 

This product has been designed for use with detergents 
that are specifically approved for pressure washer use. The 
use of other cleaning detergents may affect the operation 
of the product and void the warranty.

  CAUTION - SPRAY GUN

 

The spray gun kicks back, so hold it with both hands.

 

The  trigger  gun  safety  lock  prevents  the  trigger  from 
being engaged accidentally and it should be placed in 
locked position when not in use.

  CAUTION - WATER

 

For use with cold water only. Do not use this product with 
other liquids.

 

To minimize the amount of water getting into the pressure 
washer, the product should be placed as far as possible 
from the cleaning site during operation.

 

The  water  supply  system  must  be  protected  against 
backflow.

 

Prior  to  starting  the  pressure  washer  in  cold  weather, 
make sure there is no ice in any parts of the equipment.

 

Never  use  the  product  with  water  contaminated  with 
solvents (e.g. paint thinners, gasoline, oil, etc.).

 

Always prevent debris from being drawn into the product 
by  using  a  clean  water  source  and  an  additional  water 
filter, if required.

Safety Advice

1.2 Safety Warnings

  CAUTION - SERVICE

 

Before cleaning, repair, inspecting, or adjusting, shut off 
the  engine  and  make  sure  that  all  moving  parts  have 
stopped.

 

Have your product serviced by qualified repair personnel 
using only identical replacement parts. This ensures the 
safety of the product is maintained.

 

Ensure  proper  maintenance.  Check  for  misalignment 
or binding of moving parts, breakage of parts and any 
other condition that may affect the product’s operation. 
If damaged, have the product repaired before use. Many 
accidents are caused by poorly maintained equipment.

  IMPORTANT - COLD WEATHER START

 

Do  not  operate  this  pressure  washer  in  temperatures 
below  5°C.  Operating  pressure  washer  under  the 
temperature of 5°C may cause damage to the pump and 
other pressure washer parts.

  IMPORTANT - SAFETY FEATURES

 

THERMAL  RELIEF  VALVE:

  Protects  the  pump  from 

overheating in case the nozzle gets clogged. This system 
should  not  be  abused.  Make  sure  the  pump  does  not  
overheat.

 

LOW-OIL  AUTO  SHUT-OFF: 

Protects  the  engine  and 

prevents  operating  without  proper  lubrication.  If  the 
engine oil level goes below the recommended level, the 
pressure cleaner shuts off automatically.

  CAUTION - PREVENT PUMP DAMAGE

 

Do not run the engine for more than 5 minutes without 
pressing the wand trigger or damage to the pump might 
occur.

 

Never let the engine run unless the product is connected 
to the water supply. Ensure water is running through the 
pressure cleaner before attempting to start the engine.

 

Never run caustic fluids or acid through this product.

  IMPORTANT - STORAGE

 

Store  the  product  in  a  well-ventilated  area,  with  an 
empty fuel tank. Fuel should never be stored or placed 
near the product.

 

When  storing  the  product  for  winter,  ensure  that  it  is 
stored indoors (at room temperature), in a dry location 
away from any heat or ignition sources.

 

If the product is to be stored with a fuel in the fuel tank, 
ensure  to  add  a  fuel  stabilizer  to  keep  the  gas  from 
breaking down.

 

To protect and extend the life of the product when storing 
it, use an antifreeze agent for the pump, which can be 
found at your local 

Canadian Tire®

 store.

1.3 Intended Application

This product is designed for specific residential applications. Do 
not  modify  or  use  this  product  for  any  application  other  than 
the one it was designed for. This equipment was not designed 
for industrial use. Please refer to the icons below for suggested 
applications. For questions regarding other uses, please refer to 
our website at 

www.simoniz.ca

 or call us at 

1-866-4SIMONIZ 

(1-866-474-6664).

  IMPORTANT - APPLICATIONS

STAIRS

LAWN EQUIPMENT

VEHICLE

FENCING

DECK OR PATIO

GARAGE FLOOR

DRIVEWAY

SECOND STORY

PAINT PREP

SIDING

Safety Advice 

039-8593-Gas-Pressure-Cleaner-EN-01.indd   6-7

1/11/12   10:21 AM

Содержание 039-8593














Отзывы: