Technical data
Page 13
Connection and operation
Connection
see chapter Figure 7: „Wiring diagram total (simplified illustra-
tion)“ on page 7
Terminal clamps
Tension spring clamps 0.5 mm² – 2.5 mm²
Deadlock according to prEN 12101-9
Option, factory setting: Yes
Maximum wire length between control unit and
actuator
Pause time during direction change
200 ms
Maintenance
See supplement „Safety instructions and warranty conditions“
Installation and environmental requirements
Operating temperature
-5 to 40
°C
3
Storage temperature
Suitable for outdoor installation
No
Registrations and certificates
EN compliant
As per EMC-directive 2004
/ 108
/ EC
and the low-voltage directive 2006
/ 95
/ EC
Additional registrations, certificates
ISO 21927-9
prEN 12101-9
EN 12101-10
EPD acc. ISO
14025 and EN
15804
Classification as per prEN 12101- 9
Class D
Classification as per EN 12101-10
Class A
Environmental Class as per EN 12101-10
1
Control time of analog-
/ digital-input
Input digital (RZ, RA, LZ, Z, A)
500 ms
Input analog (B1, B2, B3) during mains operation
500 ms
Input analog (B1, B2, B3) during emergency power
operation
2500 ms
Technical information lead battery
Maintenance-free lead battery
Size (w x d x h)
178 x 34 x 64 mm
Weight
2 x 0,95 kg
VdS registration
G101139
Output voltage per battery
10.5 V
DC to 14.1 V
DC
Output voltage total (series connection)
21.0 V
DC to 28.2 V
DC
Rated capacity (total)
2.3 Ah
Service life
approx. 4 years
1.
With respective use of IP66 cable lead-through
2.
The protective conductor is used as a functional conductor for a higher EMC immunity and should therefore be connected.
3.
This temperature range applies to all components of the SHEV 3 / 6 system (including the battery).
