To temporarily skip the channel from the Scan-Group, press OK then select Skip.
Skipped channels are restored when a different Scan Group is selected or if Scan is
exited. The Priority Channel cannot be skipped.
OK: Edit is only active for User Scan Groups and opens up the Scan-Edit Screen for the
selected Scan Group, which allows channels to be added, deleted or set as the priority
channel (see below).
While listening on the channel, the User can PTT on that channel. After the signal
disappears the radio will remain listening on the channel for a short time before
resuming scanning.
The Keypad may be used for quick channel change (e.g. 456#).
7.7.2. Scan-Edit Screen
Press OK and select Scan Edit.
In the Scan-Edit Screen the display shows the Channel List
(excluding Vote and Multiax channels) and the message line
shows either‘Member’ or ‘Priority’.
Press the
▼
/
▲
keys to show channels within the Scan Group.
Press OK to Add/Delete a channel, or change the Priority
Channel.
If the
▼
/
▲
keys were used to select ‘Add’…
...Then this Screen will appear. Press OK to confirm channel
selection and to return to the previous screen.
Alternatively, if the
▼
/
▲
keys were used to select ‘Prty’ (Priority)…
...Then this Screen would appear. Press OK to confirm Priority
selection and to return to the previous screen.
When adding channels (or changing Priority Channel), use the
▼
/
▲
keys to scroll
through all available channels, and press OK to make a selection.
In all Screens, press Back to return to previous screen.
Doc Number:
TNM-U-E-0089 ISSUE 2.2
Page
35