P25 SRM9030/9030
Plus
– OPERATING INSTRUCTIONS
TNM-U-E-0094
Oct 15 (Iss. 2.0)
Page 62
APPENDIX B
Vehicle Installation Instructions
The antenna(s) used for the SRM9000 series of mobile two-way radios must be installed to provide
a separation distance of at least 90 cm (35.5 inches) from all persons for SRM9000AC (150 MHz
–
174 MHz), 75 cm (29.5 inches) for SRM9000TU and SRM9000UW (406.1 MHz
– 512 MHz) and
55 cm (21.7 inches) for SRM9000X8 (806 MHz
– 870 MHz). The gain of the antenna(s) may not
be greater than 0 dBd (2.14 dBi).
If the required separation distance extends beyond the physical boundary of the vehicle, the
antenna must be installed on the centre of the roof
ONLY
and must be installed in a vehicle having
the following characteristics in order to prevent bystanders from being exposed to levels exceeding
the limits set for General Population/ Uncontrolled exposure environment:
All passengers must be sitting under a solid metal roof
The rooftop width must be at least 180 cm (71 inches) for SRM9000AC (150 MHz
–
174 MHz), 150 cm (59 inches) for SRM9000TU and SRM9000UW (406.1 MHz
– 512 MHz),
or 70 cm (28 inches) for SRM9000X8 (806 MHz
– 870 MHz)
Mobile Antenna
Install the antenna at the centre of the roof or the centre of the trunk deck, taking into account the
bystander exposure conditions of backseat passengers and recommended minimum lateral
distances in
Tables 4(a), 5(a) and 6(a)
. These mobile antenna installation guidelines are limited to
metal body motor vehicles or vehicles with appropriate ground planes.
The antenna installation must additionally be in accordance with:
(a). The requirements of the antenna manufacturer/supplier
(b). Instructions in the Radio Installation Manual, including minimum antenna cable lengths.
(c). The installation information of how to install the antenna to facilitate recommended operating
distances to all potentially exposed persons.
Use only Simoco approved supplied antenna or Simoco approved replacement antenna.
Unauthorized antennas, modifications, or attachments could damage the radio and may violate
FCC regulations.
Approved Accessories
This radio meets the FCC RF exposure guidelines when used with the Simoco accessories
supplied or designated for the product. Use of other accessories may not ensure compliance with
the FCC’s RF exposure guidelines and may violate FCC regulations.
To obtain a list of Simoco approved accessories contact Simoco Customer Services (see Support
page for details) or visit the company website
accessories.
Contact Information
For additional information on exposure or other information, please contact Simoco Customer
Services (see Support page for details).
