8
9
SD XPRESS
owner’s manual
www.simmonsdrums.net
The first name in electronic drums.
The first name in electronic drums.
Assembly instructions
Assembly instructions
Step 1:
First remove the bottom case from the packing and insert the 2
aluminum tubes into the bottom case as shown in the image and
tighten the screw so the plastic support is tightly attached to both
the base and the tubes.
Step 5:
Assemble Hi-Hat cymbal as shown in the image and tighten the T-screw.
Step 3:
Insert the cymbal poles them into the respective holes by the pads
as shown in the image and tighten the T-screw.
Step 7:
Insert the snare pad onto the Snare rod as shown in the image and
tighten the T-screw.
Step 4:
Assemble Crash cymbals as shown in the image and tighten the T-screw.
Step 8:
Once assembled, your SDXpress 2 kit should look like the image
below.
Step 2:
Remove the top pad/sound module assembly from the packing
and insert it into the drum stand as shown in the image and tighten
the screw. Again, make sure the plastic support is tightly attached
to both the assembly and the tubes.
Step 6:
Locate the Snare rod from the packing case, insert it into drum
stand as shown in the image and tighten the T-screw.
Note: Drum key for
adjusting the Snare.
