Simmons SD5K, Руководство пользователя

Страница: 14 / 20

User’s Manual
Digital Drum Kit
reverb
factory settings
12
This function sets the reverb effect of the drum.
1. In “kit mode,” press the [kit] button again. The display
will show the current reverb setting.
2.
Press
[+]
or
[ - ]
buttons to turn on or turn off the reverb.
This feature resets the drum module to its original factory presets.
1. Turn the power off.
2. Turn on the power while holding the [tempo - ] and [tempo +] buttons.
pad rejection
Prevents crosstalk caused by pads or drums connected to other inputs.
It sets a “gate” under which other pads cannot mis-trigger neighboring ones.
1. Hold down [voice/volume] and press [song/volume] buttons. Display shows:
“JXX’, the rejection value is indicated. (XX=rejection level value, 00 to15)
2. Press [pad] button or hit the pad you want to set. The pad indicator lights up.
3. Press [+] or [ - ] buttons to adjust the rejection of pads. Range : 00 –15
4. Repeat steps 2 and 3 to set the voice for another pad.
Note:
1. After adjusting the rejection value, you can save them into memory.
In the rejection mode, press the [save] button. You will then be
returned to the previous display.
2. If the drum remains untouched for 10 seconds, the LED will return to the previous display.
3. If you turn off the power without saving, you will lose the changes you have just made.
4.
This parameter affects all kits.