3
Assembly
IMPORTANT!
Before assembly or each use, inspect this product for damaged hardware, loose joints, missing parts or sharp edges.
DO NOT
use if any parts are missing or broken. Contact manufacturer for replacement parts and instructions if needed.
Never substitute parts.
1
2
3
• Grab the handle and lift up to unfold the stroller with the
other hand.
• Locate the stroage support straps. Fit the male strap end
into the female strap end and pull the two ends apart until
you hear them click into the lock position. Repeat this proce-
deure for second starp.
Attaching Rear Wheel Axle
• Locate the rear wheel axle and the stroller frame.
• Insert the rear wheel housing onto the rear frame support
• Push the rear wheel housing until you hear it “click” into the
locked position.
• Pull down on the rear wheel axle to assure it is properly locked
into position.
Opening Stroller
• Locate the latch clip on the side frame of the stroller.
• Pull to release the latch clip.
Rear Wheel Housing
Customer Service
Tel. 1-(800)-218-2741
www.SimmonsKidsProducts.com
Storage Bag
Support Straps
4
Attaching Front Swivel Wheels
• Locate the legs on the front of the stroller. (as pictured above)
• Attach the front wheel unit to the front of the stroller leg, push
up on the wheel unit until you hear it “click” into the locked
position.
• Pull on the front wheel assembly to make sure it is securely
attached to the front leg.
• Repeat this procedure to attach the other front wheel assembly.
Washer
Button
