16
GB
Touch Control Panel (Type 1)
ON / OFF
Speed (+)
Digital screen
Speed (-)
Light
ON / OFF:
Starts the motor. The engine initially runs at speed level 1.
Speed
(+):
Increases the speed of the motor. Maximum 3
rd
speed level.
Speed (-):
decreases the speed of the motor. Minimum 1
st
speed level.
Lamp:
Turns the light on and off. When the lamp is on, the point symbol
appears on the screen.
Timer:
It activates when the lamp key is held down for 3 seconds. The device
starts to flash at the current speed level. The device switches off after 15
minutes.
Air Cleaning:
Activates when the air purge key is pressed with the remote
control. The screen symbols start to rotate while the engine is running. The
system then shuts down automatically. The cycle is valid for 24 hours only.
Filter Warning:
A
'C ’
warning appears on the screen at the end of the 100-
hour engine run time. Press and hold the
speed minus (-)
key for 5 seconds
while the product is closed. The
'E'
symbol appears on the display. This will delete
the alert and reset the time. The filter fullness warning appears for 2 seconds
when the
ON/OFF
key is pressed. This warning will not be shown in revolution
changes.
Automatic Power-off:
For safety purposes, the circuit board is programmed to
turn off the engine for a maximum of 5 hours and the lighting for a maximum
of 10 hours. The engine shutdown feature is disabled when the air purge
function is activated.
