Simfer B6EB56001, Руководство пользователя

Страница: 15 / 87

15
Gas Connection
WARNING: Before starting any work related with gas installation, turn off
gas supply. Risk of explosion.
WARNING: Gas hose and electric connection of the appliance should not
pass next to hot areas such as back of the appliance. Gas hose should
be connected by making wide angle turns against breaking possibility.
Movement of appliance whose gas connection is made may cause gas
leakage.
WARNING:
While making gas leakage control; never use lighter, match,
glowing cigarette or similar inflammable matter.
Connect your appliance to gas oven from the shortest way and in a manner
to prevent any leakage. For safety, the hose used should be maximum
125 cm and minimum 40 cm.
Apply soap bubble on connection point. If any leak/leakage exists, foaming
will occur on soaped region.
For LPG connection;
For LPG (cylinder) connection, affix metal
clamp on the hose coming from LPG cylinder.
Affix an edge of the hose on hose inlet
connector behind the appliance by pushing
to end through heating the hose in boiled
water. Afterward, bring the clamp towards
end section of the hose and tighten it with
screwdriver. The gasket and hose inlet
connector required for connection is as the
picture shown below.
WARNING:
The regulator to be affixed on LPG cylinder should have 300
mmSS feature.
Main Gas Pipe
Gasket
Hose Inlet Connector
Metal Clamp
Lpg Connection Hose