3
Directions for Use:
Place the swim seat at first on the water, out of child’s standing depth, child
facing towards the front arrow mark on product and then position the child’s legs
through the bottom legs holes of the swim seat. Child’s body shall be
approximately upright and the water level is at or about the level of the nipples.
After use, in sufficiently deep water take the child out of the swim seat.
Deflate the air chambers as described above.
Storage and maintenance:
Rinse the Swimming Float with fresh water and air dry thoroughly. Fold the
item and store it at a dry place, normal room condition and out of direct sun light.
Attention that no other weights and sharp edges and points compress on the plastic
foil. Powdering with talcum is not necessary. The folded product is not allowed to
be unfolded at a temperature below 5 °C, otherwise the plastic film would be
damaged. Please keep this instruction for later using.
Service Adress:
Simex Outdoor International GmbH
Schiefbahner Str. 12
41741 Viersen / Germany
Tel.: 0049-02162-10200-0
E-Mail: [email protected]
Art. 47030 Baby Schwimmsitz
