Simex STI-73, Руководство пользователя

Страница: 34 / 40

User manual - RATEMETER STI-73
Register Write Range Register description
14h
15h
Yes 0 ÷ 999999
“mUL” parameter in “inPUt” menu
Value 0 is interpreted as 1 000 000
16h
17h
Yes 0 ÷ 999999
“div” parameter in “inPUt” menu
Value 0 is interpreted as 1 000 000
18h Yes 0 ÷ 399 “ZEro t” parameter in “inPUt” menu expressed in tenth of seconds
19h Yes 0 ÷ 199 “mEAS t” parameter in “inPUt” menu expressed in tenth of seconds
1Ah Yes 0 ÷ 199
“vALUE” parameter in “ FiLtEr” menu (measurement filtering rate)
1Bh Yes 0 ÷ 1999 “droP” parameter in “FiLtEr” menu expressed in tenth of percent
20h 2 Yes 0 ÷ 199 Device address
21h No 2066h Device identification code (ID)
22h 3 Yes 0 ÷ 7
“bAud” parameter in “rS-485” menu (baud rate);
0 - 1200 baud; 1 - 2400 baud; 2 - 4800 baud; 3 - 9600 baud;
4 - 19200 baud; 5 - 38400 baud; 6 - 57600 baud; 7 - 115200 baud
23h 4 Yes 0 ÷ 1
“mbAccE” parameter in “rS-485” menu (permission to write
registers via RS-485 interface);
0
- write denied ;
1
- write allowed
24h Yes see descr.
Parameters of “ SECU ” menu (binary format (0 - „ oFF ”, 1 - „ on ”):
bit 0 - “ Acc r ” parameter
25h Yes 0 ÷ 5
“rESP” parameter in “rS-485” menu (additional response delay);
0 - no additional delay; 1 - ” 10c ” option; 2 - ” 20c ” option;
3 - ” 50c ” option; 4 - ” 100c ” option; 5 - ” 200c ” option;
27h Yes 0 ÷ 99
“mbtimE”
parameter in
“rS-485”
menu (maximum delay between
received frames); 0 - no delay checking;
1
÷
99
- maximum delay expressed in seconds
2Dh Yes 1 ÷ 8
“ briGHt ” parameter (display brightness);
1 - the lowest brightness; 8 - the highest brightness
2Fh Yes 0 ÷ 1
“ Edit ” parameter (numerical parameters edit mode);
0 - „ dig ” mode; 1 - „ SLid ” mode
Parameters or relay R operation
30h
31h Yes
Yes
0 ÷ 999999 “ SEt P ” parameter in “ rELAy ” menu, no decimal point included
32h
33h Yes
Yes
0 ÷ 99999 “ HySt ” parameter in “ rELAy ” menu, no decimal point included
34h Yes 0 ÷ 5
“ modE ” parameter in “ rELAy ” menu:
0 - “ noACt ” mode; 1 - “ on ” mode; 2 - “ oFF ” mode; 3 - “ in ” mode;
4 - “ out ” mode; 5 - “ modbuS ” mode
35h Yes 0 ÷ 999
“t on” parameter in “rELAy” menu, expressed in tenth of seconds or
tenth of minutes depend on
“unit”
parameter
36h Yes 0 ÷ 999
“t oFF” parameter in “rELAy” menu, expressed in tenth of seconds
or tenth of minutes depend on “unit” parameter
37h Yes 0 ÷ 1
“unit” parameter in “rELAy” menu:
0 - seconds; 1 - minutes
34