User manual - DATA RECORDER SRD-99 and cooperating software
7.4.6.
”Input settings” menu (
I version
)
”Unit”
- 4-character sequence constituting the unit for the value measured on the given
channel.
Fig. 7.20.
”Inputs settings”
(part 1)
”Input type”
- type of input/sensor. The following options are available:
”inactive”
- input is not active
”0-20 mA”, ”4-20 mA”
- current inputs, displayed value is defined by “
Hi value
”,
“
Lo value
” and "
Dec. point
" parameters.
”Hi value”
”Lo value”
- these parameters define the values displayed for maximum (Hi), and
minimum (Lo) current of
user defined range
(0-20 mA or 4-20 mA). The
aforesaid parameters can be set in the range - 9999 ÷ 9999.
A negative number can be input by entering a
'–'
mark (using
[^]
,
[v]
keys
).
The value of the
“Lo value”
parameter can be higher than the value of
“Hi value”
parameter. In such a case, for an increasing value of input current the displayed
value decreases.
Fig. 7.21.
”Inputs settings”
menu
(part 2)
”Dec. point”
- position of the decimal point for results displayed in numerical form.
The following options are available:
” 0”
” 0.0”
” 0.00”
”0.000”
The position of the decimal point is selected with
[^]
,
[v]
keys.
50
i
