Simex SLM-44, Руководство пользователя

Страница: 16 / 28

User manual for electronic preset counter SLN-44
7.2.1. Count speed
Program
Item
Display Setting Values Setting Key Default
Value
IN Hz
If DP2 is OFF (30 Hz; see: 7.1 DIP SWITCH
SETTINGS , str.12) " Count Speed " is not displayed.
Key 1 will select
the desired
value
7.2.2. Output mode
One of the following 6 output modes can be selected. Default setting is
Standard Output
Output occurs when count value reaches preset
value. Different output conditions can be set: One-
Shot (10-9990 ms), Hold, Hold1, Hold2
Equal Output
Output occurs only when and continues as long as
count value is equal to preset value
Lower Limit Output
Output occurs when count value reaches below
the set value
Upper Limit Output
Output occurs when count value reaches above
the set value
Upper - Lower Limit Output
Output occurs when count value reaches below
(Lower) or above (Upper) the set value
Upper 1 - Upper 2 Limit
Output Output occurs when count value reaches above
the set value
Output mode programming:
Program
Item
Display Setting Values Setting Key Default
Value
OUT 1 level preset:
2 level preset:
Key 1 will
select the
desired value
16