Simex PUR-94D, Руководство пользователя

Страница: 65 / 80

User manual - CONTROLLER PUR-94D
Register Write Range Register description
2Bh Yes 0 ÷ 1 “ R3 ” parameter in “ bEEP ” menu: 0 - off; 1 - on
2Ch Yes 0 ÷ 1 “ R4 ” parameter in “ bEEP ” menu: 0 - off; 1 - on
2Dh Yes 1 ÷ 8
“ bri ” parameter (display brightness);
1 - the lowest brightness; 8 - the highest brightness
2Eh Yes 0 ÷ 6
“ diSP ” parameter (value on the SV display);
0 - “ no ” mode; 1 - “ 1 rEL ” mode; 2 - “ 2 rEL ” mode; 3 - “ 3 rEL ”
mode;
4 - “ 4 rEL ” mode; 5 - “ Ctrl ” mode; 6 - “ OutP ” mode;
2Fh Yes 0 ÷ 1
“ Edit ” parameter (numerical parameters edit mode);
0 - „ dig ” mode; 1 - „ SLid ” mode
30h Yes 0 ÷ 3
“ Sour ” parameter in “ rEL1 ” menu:
0 - “ InPU ” option; 1 - “ modb ” option; 2 - “ PidH ” option; 3 - “ PidC ”
option;
31h Yes 0 ÷ 5
“ modE ” parameter in “ rEL1 ” menu:
0 - “ noAC ” mode; 1 - “ on ” mode; 2 - “ oFF ” mode; 3 - “ in ” mode;
4 - “ out ” mode; 5 - “ PULS ” mode
32h Yes -999 ÷ 9999 “ SEtP ” parameter in “ rEL1 ” menu, no decimal point included
33h Yes -999 ÷ 999 “ HySt ” parameter in “ rEL1 ” menu, no decimal point included
34h Yes 0 ÷ 999
“t on” parameter in “rEL1” menu, expressed in tenth of seconds or
tenth of minutes depend on “unit” parameter - register no. 36h)
35h Yes 0 ÷ 999
“toFF” parameter in “rEL1” menu, expressed in tenth of seconds
or tenth of minutes depend on “unit” parameter - register no. 36h)
36h Yes 0 ÷ 1
“unit” parameter in “rEL1” menu:
0 - seconds; 1 - minutes
37h Yes 0 ÷ 2
“AL” parameter in “rEL1” menu (only when rEL1 is relay output): 0
- no changes; 1 - on; 2 - off
38h Yes -999 ÷ 9999 “ SEt2 ” parameter in “ rEL1 ” menu, no decimal point included
39h Yes -999 ÷ 9999 “ InLo ” parameter in “ rEL1 ” menu, no decimal point included
3Ah Yes -999 ÷ 9999 “ InHi ” parameter in “ rEL1 ” menu, no decimal point included
3Bh Yes 0 ÷ 9999 “ PEri ” parameter in “ rEL1 ” menu, no decimal point included
3Ch Yes 0 ÷ 9999 “ H on ” parameter in “ rEL1 ” menu, no decimal point included
3Dh Yes 0 ÷ 9999 “ HoFF ” parameter in “ rEL1 ” menu, no decimal point included
3Eh Yes 0 ÷ 1
“ Acti ” parameter in “ AL ” menu, (only when rEL1 is OC-type output):
0 - “ noCH ” option ; 1 - “ USdu ” option ;
3Fh Yes 0 ÷ 1000 “ duty ” parameter in “ AL ” menu (only when rEL1 is OC-type output)
40h Yes 0 ÷ 1000
Current OC type output fill factor expressed as a percentage without
the decimal point (only where
rEL1 is the OC type output)
41h Yes -999 ÷ 9999 “ OFFS ” parameter in “ rEL1 ” menu, no decimal point included
42h Yes 0 ÷ 1000 “ SEnS ” parameter in“ rEL1 ” menu, no decimal point included
65