Simex PUR-49D, Руководство пользователя

Страница: 73 / 80

User manual - CONTROLLER PUR-49D
13. DEFAULT AND USER'S SETTINGS LIST
Parameter Description Default value User's value
Desc.
page
Parameters of relay R1 operation (“rEL1” menu)
Sour Relay R1 signal source InPU 36
modE Operation mode of relay R1 on 36
SEtP Relay R1 threshold 20.0 36
SEt2 Relay R1 second threshold 40.0 36
HYSt Hysteresis of relay R1 0.0 37
t on Turn on delay of relay R1 0.0 37
toFF Turn off delay of relay R1 0.0 37
unit Unit of “t on” , “toFF” parameters of relay R1 SEC 37
InLo The lower limit of the PWM range of relay R1 0.0 38
InHi The upper limit of the PWM range of relay R1 100.0 38
PEri Relay R1 output signal period 1.0 38
H on Low state minimal time of relay R1 PWM signal 0.0 38
HoFF High state minimal time of relay R1 PWM signal 0.0 38
AL Reaction for critical situation of relay R1 oFF 38
OFFS Relay R1 output offset 0.0 37
SEnS Relay R1 output sensitivity 100.0 37
Parameters of relay R2 operation (“rEL2” menu)
Sour Relay R2 signal source InPU 36
modE Operation mode of relay R2 on 36
SEtP Relay R2 threshold 40.0 36
SEt2 Relay R2 second threshold 60.0 36
HYSt Hysteresis of relay R2 0.0 37
t on Turn on delay of relay R2 0.0 37
toFF Turn off delay of relay R2 0.0 37
unit Unit of “t on” , “toFF” parameters of relay R2 SEC 37
InLo The lower limit of the PWM range of relay R2 0.0 38
InHi The upper limit of the PWM range of relay R2 100.0 38
PEri Relay R2 output signal period 1.0 38
H on Low state minimal time of relay R2 PWM signal 0.0 38
HoFF High state minimal time of relay R2 PWM signal 0.0 38
AL Reaction for critical situation of relay R2 oFF 38
73