Simex MultiCon CMC-99/141, Руководство пользователя

Страница: 95 / 332

User Manual For - CONTROLLER/DATA RECORDER MultiCon CMC-99/141
see Fig. 4.8
Fig. 7.48. The view of a sample list of available hardware inputs for a device
In the device there are two methods to change the source configuration of the
Built-in inputs
:
•
using the Configure source button in the Logical channel menu in
the Hardware input mode,
•
using the
Built-in inputs
menu,
The
Source
for the
Hardware input
mode can be (in the same order as the list in the device -
see Fig. 7.48 ):
a) installed input modules in the appropriate slots A, B or C (see Fig. 4.8 ) - the list of
currently available modules is on the website,
A Description of the input modules parameters is shown in
Chapter 7.9.2. Built-in inputs -
Input modules
.
The following steps change the Source configuration for the sample of 3 modules shown in
Fig. 7.49 :
– Step (1) - selection of the Source for the channel in the Hardware input mode, for
example: Inp.A1:Current , next press the Configure source button to enter
the
Source configuration
menu,
– Step
(2)
- press the
Mode
button to change the range of the current input,
– Step (3) - choose from the list of available options for the signal range - for example:
Current 0-20mA (for the current module),
95
i
Slot A, Input 1
Slot X (built-in slot)
Input 4
I16 Module
16 current inputs
Built-in binary input
Built-in Demo input