MEGAPLANO
MEGAPLANO
With metal halide lamp 20W G8,5 MT UV-STOP
S.5423 - S.5425 - S.5723.19 - S.5725.19
With metal halide lamp 35W G8,5 MT UV-STOP
S.5427 - S.5727.19
With fluorescent lamp 18W G24q-2 FSQ
S.5424 - S.5724.19
With accent LED 8,4W 230-240V
For metal halide versions use only UV-STOP lamp
TECHNICAL CHARACTERISTICS:
CLASS I
PROTECTION LEVEL : IP 67
ASSEMBLING INSTRUCTIONS:
Fix the recess box (
A
) in the concrete or in the ground, with 25-30cm of supply cable for maintenance
Leave 15 cm gravel low the recess box
Open the fitting removing the rings (
B
), where necessart, and the glass (
C
) unscrew the screws (
D
)
Wiring the cable from fitting and supply cable in IP68 (art.
S.5503
) or similar and insert it in the space between
the recess box and the fitting.
Fix the fitting to pre-installed recess box (
A
) with the supplied screws (
G
)
Insert the correct supplied lamp (
E
), re-install the glass (
C
) and the rings (
B
) where necessary with screws (
D
)
REMARKS:
Use the appropriate recess box for recess.
Do not exceed the maximum allowed wattage.
Disconnect the fitting before the maintenance.
Use <HAR> supply cable.
In case of glass damage, replace it before using the fitting.
Fitting approved for shock up to 6,5 Joule
Installation should be carried out by a suitably qualified person in accordance
with good electrical practice and the appropiate national wiring regulations.
Is very important to follow these instructions to, enable the fitting to be installed
correctly. Please retain for information.
ISTRMEGAPLANO REV.3 05/12
S5461-S5761W-S5462-S5761.19-S5761W.19-S5762.19-S5468-S5468W
A
B
C
E
D
OK
NO
NO
325
100
260
E
0,5m
Mantain a minimum distance
of 0,5m between luminaire and
lighted surface.
