59
2.11
ASSEMBLING THE SKIRT
Proceed as follows to assemble the skirt
(fig. 11):
– Position the front and back supports of
the skirt base (1) between the feet on
the two heads.
– Anchor the side supports (2) and (3) to
the front and back of the skirt base (1)
with the M6 nuts supplied.
– Anchor panel (4) to panel (5) and panel (7)
to panel (8) using the connecting pins.
– and panels (7-8) to panel (9) using con-
necting pins, anchoring them together
w i t h t w o 7 S P x 1 / 2 ” s e l f - t a p p i n g
screws.
– Assemble panels (4) and (6) on the base
(3) , anchoring them on connecting pins.
Proceed in the same way to anchor
panels (7) and (9) to the base (2).
– Position the lower front wall (11) by fit-
ting it in between the screws on the bur-
ner manifold support brackets and the
cas t ir on body ; anchor t he walls t o
panels (6) and (9) with two 7SP x 1/2”
self-tapping screws.
– Position the upper front wall (12) by
anchoring it to panels (5-8) and to wall
(11) using four 7SP x 1/2” self-tapping
screws.
– Anchor the rear wall (13) to panels (4-5)
and (7-8) using the eight 7SP x 1/2”
self-tapping screws supplied.
– Assemble the baseboard (14), ancho-
ring it to panels (6) and (9) using connec-
ting pins.
– Proceed in the same way to anchor the
upper front panel (16) in place.
– Assemble the cover (10) and the door (15).
Fig. 10
KEY
1 Boiler
body
2 Burner
3 Burner
manifold
4 TCB M5 x 8
screw
5 Aluminium
washer ø 14
6 Burner
nozzle
KEY
1 Front and rear skirt base support
2 Right skirt base support
3 Left skirt base support
4 Lower left side rear panel
5 Upper right side rear panel
6 Front left side panel
7 Rear lower right side panel
8 Rear upper right side panel
9 Front right side panel
10 Cover
11 Lower front wall
12 Upper front wall (cleaning plate)
13 Rear wall
14 Baseboard
15 Door
16 Upper front panel
NOTE:
The position of rings (6) and (9) may
be inverted, though the ring with the
slit must always be positioned on the
side where the gas assembly exits.
Fig. 11
