Sime ECOMAXI 160 ErP, Руководство пользователя

Страница: 57 / 148

Installation, use and maintenance manual
MANUAL CODE: 6328407
Page 57 / 148
7 OPERATION AND USE
The product is managed through a user interface
which allows you to:
 set the operating mode;
 change the operating parameters;
 view and manage any alarms;
 check the status of the resources.
Hereinafter, “switching on” should be
understood as the passage from stand-by
mode to ON mode, and the term
“switching off” should be understood as
the passage from ON mode to stand-by
mode.
Hereinafter, the term “advanced
procedure” should be understood as
referring to specific appliance procedures
as described in the “advanced set-up”
section.
7.1
USER INTERFACE
The user interface (Fig. 15) allows you to check and
adjust appliance operation. It is equipped with a
display and the following buttons:
 On/Stand-by button;
 SET button;
 DOWN button;
 UP button.
Fig. 15 – User interface
7.1.1 BUTTONS AND INTERFACE
7.1.1.1 On/Stand-by button
Use this button to:
 turn the product on (ON status);
 put the product in stand-by mode (in this
mode,
the appliance can operate
automatically according to specific time
settings and automatically activate the anti-
legionella and defrosting functions).
When the appliance is powered up, it
keeps the same status as when the power
supply was disconnected.
7.1.1.2 [SET] button
Use this button to:
 confirm a selection or value set.
7.1.1.3 [UP] button
Use this button to:
 scroll up through the list of parameters;
 increase the value of a parameter.
7.1.1.4 [DOWN] button
Use this button to:
 scroll down through the list of parameters;
 decrease the value of a parameter.
7.1.1.5 Interface display
The interface display (Fig. 16) shows the:
 control temperature;
 alarm/error codes;
 status notifications;
 operating parameters.
Fig. 16 – User interface display
Compressor
LED
If it is on: the compressor is
active.
If it is flashing:

The compressor is in
the
process of
switching on.
 The operating setpoint is
being modified;
Defrosting LED If it is on: defrosting is in
progress
MF LED If it is on: the electrical resistor
on the boiler is active
Fan LED If it is on: the fan is active
On/Stand-by
button SET
button DOWN
button UP
button
Display