12
IT
1.10.1.3 Dati tecnici
GENERALI
Alimentazione
230 (+10 ÷ -15)
Vac (%)
Frequenza
50 (
±
5 )
Hz (%)
Range di temperature di funzionamento -20÷ +60
°C
Fusibile di rete
3,15AF (rapido) 5x20
Varistore di protezione
300 D7
Vac
SOLAR PUMP - P1 TRIAC (230 Vac)
49 – Cos
φ
1
W
Uscita AUX 3 - P1 PWM (230 Vac)
230 – 0,5
Vac/A
Uscita AUX 2 - P2 (230 Vac)
0,5 – Cos
φ
1
A
Uscita AUX 1 - Abilitazione termostato/P2 0,5 – Cos
φ
1
A
Uscite free contact - D1 (230 Vac)
230 – 0,5
Vac/A
SONDE DI TEMPERATURA NTC
Range corretto funzionamento sonde
-40 ÷ +105
°C
Temperature segnalazione anomalia sonda -5>>T>>120
°C
Tolleranza generale sulle temperature
(riferita alla sola elettronica)
±1,5
°C
SONDE DI TEMPERATURA PT1000
Range corretto funzionamento sonda
-40 ÷ +250
°C
Temperature segnalazione anomalia sonda -5>T>170
°C
Tolleranza generale sulle temperature
(riferita alla sola elettronica)
±1,5
°C
CONDIZIONI AMBIENTALI DI IMPIEGO
Temperatura ambiente di funzionamento -20 ÷ +60
°C
Temperatura di immagazzinamento e
trasporto
-30 ÷ +60
°C
Umidità ambiente max.
95% a 40
°C
1.10.2 Modulo di protezione da sovravoltaggio
La scatola di protezione da sovratensioni permette di poter pro-
teggere la centralina solare da eventuali sovratensioni
che potrebbero danneggiarla, trasmettendosi attraverso il cavo
della sonda dei pannelli solari (causate per esempio da
forti temporali).
1.11 Miscelatore termostatico (optional)
Il miscelatore termostatico
(non fornito con il sistema a circolazio-
ne forzata)
viene utilizzato negli impianti di produzione di acqua
calda per uso igienico sanitario.
La sua funzione è quella di mantenere costante, al valore im-
postato, la temperatura dell’acqua miscelata inviata all’utenza
al variare delle condizioni di temperatura e di pressione di ali-
mentazione dell’acqua calda e fredda in ingresso oppure della
portata prelevata.
In sostanza può accadere che l’acqua sanitaria contenuta nel
bollitore solare sia ad una temperatura troppo alta (es. 60°C)
e che quindi per evitare ustioni fisiche occorre mettere un mi-
scelatore termostatico che misceli l’acqua calda con dell’acqua
fredda, al fine di ottenere una temperatura ottimale di utilizzo
(es. 40°C-45°C).
1.12 Vaso d’espansione solare
I vasi d’espansione solari devono essere con la membrana in
nitrile, in quanto il fluido termovettore che circola nel circuito
primario è composto da acqua e antigelo propilenico atossico.
d
È VIETATO
Non vanno assolutamente bene i vasi d’espansione
“universali” con la membrana in butile e quelli “riscal-
damento” con la membrana in SBR in quanto l’antige-
lo rischierebbe di danneggiarli (essendo una sostanza
molto aggressiva).
L’impianto solare a circolazione forzata
Easy System
viene forni-
to con vaso espansione 18 litri con membrane in nitrile.
Fig. 10
DESCRIZIONE:
Vasi d’espansione:
litri 18 a membrana fissa in gomma nitrile.
Flangia:
in acciaio al carbonio zincata aggraffata.
Pressione:
max: 6 bar
Raccordo:
3/4”
Содержание EASY SYSTEM .1-2 FA
Страница 58: ...58...
Страница 59: ...59...
Страница 60: ...Fonderie Sime S p A Via Garbo 27 37045 Legnago Vr Tel 39 0442 631111 Fax 39 0442 631292 www sime it...