Sime Dewy HE WM, Инструкция пользователя

Страница: 5 / 12

When the boiler is connected to the “Logi-
ca Remote Control” regulator, the selector
CR/OFF/SUM/WIN/UNBLOCK must be
placed in the position ( ); the knobs of the
hot-water service heating potentiometers
do not have any effect and all of the func-
tions will be managed by the regulator (fig.
7).
If the “Logica Remote Control” breaks
down, the boiler will function by placing the
selector on the ( o ), position, obviou-
sly without consequent control of the room
temperature.
The operating instructions are reported
inside the cover (fig. 8).
Each setting or modification is displayed
(fig. 9).
3
– Safety stat trip (fig. 5)
If the safety thermostat trips, the red
"35°C" led will start flashing. In order to
attempt a boiler restar t, rotate the
selector knob to position ( ) and relea-
se immediately, returning it to the sum-
mer ( ) or winter ( ) position.
If the boiler lock-out occurs again, call
local authorised Service Centre for
technical assistance.
– Other anomalies (fig. 6)
When one of the red “40÷80°C” leds
start flashing, switch-off the boiler and
then try to ignite again.
After 2 or 3 unsuccessful attempts, do
not try again but call authorised techni-
cal staff.
SPIA ROSSA INTERMITTENTE
Fig. 5
SPIA ROSSA INTERMITTENTE
LOGICA REMOTE CONTROL
1
6
7
8
4
5
3
2
KEY
1
Display
2 Info button
3 Operating mode button: automatic operation
4 Operating mode button: manual operation
5 Operating mode button: availability
6 Cover with instruction compartment
7 Temperature knob
8 Presence button
Fig. 8
KEY
1 Display, time
2 Heating programme
3 Unit (%/C°)
4 Presence button display
5 External temperature
6 Ambient temperature
7 Holiday function
8 Operating mode
9 Line number/day
10 Burner on
11 Heating function
12 Domestic hot water/temperature/D.H.W. load
Fig. 9
Fig. 7
Fig. 6
FLASHING RED LED
FLASHING RED LED