Sime ALU PLUS HE 1100, Инструкция для пользователя, по установке и обслуживанию

Страница: 90 / 128

90
EN
5.8 Plumbing connections
The dimensions of the water fittings of
Sime ALU PLUS HE
boilers
are given below.
M
R
M
R
As
F
E
C D B A
Fig. 16
Description
ALU PLUS HE
360 720 1100
A (mm) 1551 1551 1861
B (mm) 101 101 115
C (mm) 157 186 186
D (mm) 593 664 664
E (mm) 754 754 754
F (mm) 774 774 774
M - Boiler delivery PN16 DN100 PN16 DN100 PN16 DN100
R - Boiler return PN16 DN100 PN16 DN100 PN16 DN100
As - Siphon fitting Ø15 mm Ø15 mm Ø15 mm
5.9 Condensate outlet/collection
NC
Fig. 17
m
CAUTION
– The condensate outlet duct must be airtight,
suitably sized to that of the siphon and must not be
restricted at any point.
– The condensate outlet must be constructed in full
compliance of the National or Local regulations in
force.
m
CAUTION
– It is recommended that a condensate neutralising
unit be provided and the pipework should have a
downward angle of at least 3%.
– Before commissioning the appliance, fill the siphon
with water.
5.10 Gas supply
The gas supply line must be sized by an expert, and implemented
during installation in compliance with the installation standards
in force. It must be sized according to the line pressure and the
heat input of the single appliances or those that make up the
cascade.
Before making the gas duct, check that::
– the type of gas is correct for the appliance
– the pipes are clean
– the gas supply pipe is the same size as or larger than the one
on the boiler fitting (DN50)
– there is a suitable filter installed on the gas line.
G
E
C D B A
Fig. 18
Description
ALU PLUS HE
360 720 1100
A (mm) 495 495 495
B (mm) 1056 1056 1366
C (mm) 152 185,5 185,5
D (mm) 598 664,5 664,5
E (mm) 1785,5 1785,5 1785,5
G - Gas supply PN6 DN50 PN6 DN50 PN6 DN50
a
WARNING
Once installation has been completed, check that
the joints are air tight as indicated in the installation
Standards.
m
CAUTION
It is recommended that the gas line has a suitable
filter.