SIMDID DH730
DH730 操作流程 Operation process
1.
安装
SIMHUB 软件
Install
SIMHUB
software
(请加入仪表资源 QQ 群，获取资源，群号：668145978)
2.
USB 线一定要先接入机箱后面的 3.0 接口，如接入 2.0 接口，屏幕无显示。
The USB cable must be connected to the 3.0 port on the back of the chassis first. If it is connected to the
2.0 port, there will be no display on the screen.
3.
打开仪表面板的
LCD 屏幕开关
LED 按键灯开关
open the dashboard
LCD screen switch
LED push button light switch
4.
打开 LCD 开关，保持 30 秒左右，电脑自动安装驱动后自动亮屏。Turn on the switch and hold it for about 30
seconds, the computer will automatically turn on the screen after the driver is installed automatically.
（注：如果电脑不能自动安装驱动，要到仪表资源群里，或官网下载驱动）
(
Note:
Every time the
dashboard is replaced
, the dashboard opened in front must be closed to avoid a
large amount of data conflict in SIMHUB, which will cause delay.)
5.
打开 SIMHUB 软件 Open
SIMHUB
software
click 点击
Dash Studio
