SimCom SIM800C, Проектирование аппаратного обеспечения

Страница: 47 / 52

Smart Machine Smart Decision
SIM800C_Hardware_Design_V1.02
47
2015-4-27
7.3. The Moisture Sensitivity Level
The moisture sensitivity level of SIM800C module is 3. The modules should be mounted within 168 hours after
unpacking in the environmental conditions of temperature <30
℃ and relative humidity of <60% (RH). It is
necessary to bake the module if the above conditions are not met:
Table 40: Moisture sensitivity level and floor life
Moisture Sensitivity Level
(MSL)
Floor Life (out of bag) at factory ambient
≤
30
°
C/60% RH or as stated
1 Unlimited at ≦ 30 ℃ /85% RH
2 1 year
2a 4 weeks
3 168 hours
4 72 hours
5 48 hours
5a 24 hours
6 Mandatory bake before use. After bake, it must be reflowed within the time limit
specified on the label.
NOTES:
For product handling, storage, processing, IPC / JEDEC J-STD-033 must be followed.
7.4. Baking Requirements
SIM800C modules are vacuum packaged, and guaranteed for 6 months storage without opening or leakage under
the following conditions: the environment temperature is lower than 40
℃
, and the air humidity is less than 90%.
If the condition meets one of the following ones shown below, the modules should be baked sufficiently before
re-flow soldering, and the baking condition is shown in below table; otherwise the module will be at the risk of
permanent damage during re-flow soldering.

If the vacuum package is broken or leakage
;

If the vacuum package is opened after 6 months since it’s been packed
;

If the vacuum package is opened within 6 months but out of its Floor Life at factory ambient
≦
30
℃
/60%RH or as stated
.
Table 41: Baking requirements
Baking temperature Moisture Time
40 ±5
℃ ℃
<5% 192 hours
120 ±5 ℃ ℃ <5% 6 hours
Note: Care should be taken if that plastic tray is not heat-resistant, the modules should be taken out for
preheating, otherwise the tray may be damaged by high-temperature heating.